COMPLIANCE INFO_2009-2013 - Laserfiche WebLink

Home Browse Search

For use withVeeder-Root 300 & 350series tank gauges Veeder-Root's Hydrostatic Reservoir Sensor accurately detects fluid level change in the Features reservoir and interstice of a double-wall Dual-Point Sensor alarm conditions: storage tank or line. Dual-point and single- Leak in inner wall triggers a low level alarm point technology models are ideal for loca- - Leak in outer wall triggers a high level alann in high groundwater areas;low level tions with high or low water tables. alarm in low groundwater areas. • Designed to meet Californias requirement for secondary space monitoring for The Dual-Point Hydrostatic Sensor is ideal for tanks and lines as required by AB 2481. high groundwater areas,and can differentiate Single-Point Sensor alarm conditions: between a high-level alarm condition and a Leak in inner or outer wall triggers a low level alarm in low groundwater areas. low-level alarm condition. If an inner-wall • Designed to meet California's requirement for secondary space monitoring for leak occurs,the brine solution seeps into the tanks as required by AB 2481. tank or line primary space lowering the brine level in the reservoir. The Dual-Point Sensor Temperature Rating Single-Point Sensor Dimensions: will then trigger a low level alarm. If an outer- Storage: 6.0" high, 2.5"diameter wall leak occurs,the groundwater seeps into -40 degrees C to+60 degrees C the reservoir. The Dual-Point Sensor will then Dual-Point Sensor Dimensions: trigger a high level alarm. Operating: -25 degrees C to+50 degrees C 17.3"high, 2.5"diameter p to •Withstands removal from reservoir Rests in salt brine solution of u 30% The Single-Point Sensor is ideal for low groundwater areas,since it only detects low- calcium chloride several times a year without sensor level alarm conditions. If an inner wall leak damage • Clear plastic housing for visual Cable length:occurs, the brine solution seeps into the g inspection of float operation tank. If an outer-wall leak occurs,the brine 12 feet solution leaks out of the tank. In both cases, the brine level decreases and the Single- Standard Models Point Sensor triggers a low level alarm.This Sensor Form Number:794380-301 Sensor should not be used to monitor the Description: Single-Point Hydrostatic Reservoir Sensor secondary space of a pressurized line. Sensor Form Number:794380-303 NOV 11 2013 Description: Dual-Point Hydrostatic Reservoir Sensor ENVIRONMENTAL Hydrostatic Reservoir Sensor Console CapabilitHEALTH DEPARTMENT y ' The Series 7943 Hydrostatic Reservoir Sensor is compatible with the following consoles: Console Series ' TLS-350R` 8482 TLS-350*[TLS-350J* 8470 TLS-3001 8485 *Note: An Interstitial Sensor Interface Module is required for the use of the Hydrostatic Sensors with the TLS-350,TLS-350.),EMC and TLS-3508 Consoles. Single-Point Sump Sensor shown in 6.0" For more information call configuration length. 1 $$5-561-7942 CC C ©2003 Veeder-Root Company 125 Powder Forest Drive • Simsbury,CT 06070 • USA GL G Telephone:860-651-2700 • Fax:860-651-2719 • www.veeder.com VR 13747 P/N 0576047-067 Rev.A VR3/2003 Printed in USA