Laserfiche WebLink
AUGRECEIVED <br /> 2 6 2013 <br /> ARIL <br /> ENVIRONMENTAL <br /> AWL <br /> eilas <br /> FIBERGLASS-COMPOSITE PIPE GROUP <br /> Fittings Dimensions 1 <br /> 2 through 6-inch Sizes <br /> " for Dualoy 30001 piping systems <br /> Units All dimensions are in U.S.Customary units(inches). <br /> Diametric dimensions are maximums. <br /> Insertion depths(XI,Xz)are typical. <br /> All weights(lb)are approximate. <br /> Tolerances Tolerance for centerline-to-face dimensions on fittings with bell-end <br /> configuration is*%s inch. <br /> Listings Dualoy 3000/L is Listed in the U.S.with Underwriters Laboratories for nonmetallic <br /> underground piping for motor vehicle(MV), high blend(HB), concentrated(CT)and <br /> aviation and marine(A&M)fuels(File MH9162). Dualoy 3000/L pipe and fittings are <br /> Underwritersalso listed with Underwriters Laboratories of Canada(File CMH 715). In Great Britain <br /> Laboratories ince L the Dualoy 3000/L system has been tested and accepted by the London Fire and <br /> Civil Defence Authority. Dualoy 3000/L has been issued a Certificate of Compliance <br /> to the Institute of Petroleum(IP)Specification by ERA Technology, Ltd. <br /> End configurations Bell end is standard. <br /> Taper angle The taper angle on all bell and spigot end configurations is 1 W. <br /> Pressure ratings See Ameron publication DUALoy 3000/1-FIBERGLASS PIPE AND FITTINGS, FP265,for <br /> pressure ratings. <br /> Individual system components may not have the same ratings as the pipe. Refer <br /> to the detailed product information for the specific components to determine the <br /> pressure rating for the system as a whole. <br /> Manufacturing methods The fiberglass-reinforced epoxy resin fittings shown in this document are <br /> manufactured by filament winding or compression molding. <br /> Adapters: bell x NPT female Flange rings <br /> Adapters:bell x NPT male Flange stub ends <br /> Adapters:isolation Nipples <br /> Adapters:spigot x NPT female Reducer bushings <br /> Adapters:spigot x NPT male Repair couplings <br /> 45° Elbows Sleeve couplings <br /> 90° Elbows Sump penetration pieces <br /> End caps Tees <br /> FP266E (11/07) <br />