Laserfiche WebLink
SWRCB,January 2002 Page of <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps <br /> Fill Riser Containment Sumps are Present,but were Not Tested '[)- <br /> Test <br /> Test Method Developed By: D Sump Manufacturer D Industry Standard ❑Professional Engineer <br /> ❑Other(Spec) <br /> Test lel od Used: ❑Pressure ❑Vacuum ❑Hydrostatic <br /> ❑Other(Specify) <br /> Test Equipmen sed: Equipment Resolutio <br /> NAMM Fill Sump# Fill Sump# Fill Sump# i' Fill Sump# <br /> Sump Diameter: <br /> Sump Depth: <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest / <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> testing: r <br /> Portion of Sump Tested <br /> Sump Material: <br /> Wait time between applying <br /> pressure/vacuum/water and <br /> starting test: <br /> Test Start Time: <br /> Initial Reading_ R, <br /> Test End Time: <br /> Final ReadingE1 _ <br /> Test Duration: <br /> Change in Reading -RI : <br /> Pass/Fail Threshold or Cr' ria: <br /> Test Result: D Pass ❑Fail D .Pass ❑Fail ❑ Pass Fail D Pass 0 Fail <br /> Is there a sensor in Pfe sump? D Yes D No D Yes D No D Yes D D Yes D No <br /> Does the sensor arm when D Yes D No D NA <br /> either produ r water is D Yes D No DNA D Yes D No ❑NA ,DYes D No ❑NA <br /> detected? <br /> Was se r removed for testing? p Yes ❑No D NA D Yes D No DNA ❑Yes ❑No DNA D Yom, D No D NA <br /> W sensor properly replaced and D Yes D No ❑NA <br /> verified functional after testing? ❑Yes D No ❑NA D Yes ❑No ❑NA ❑Yes ❑ ., ❑NA <br /> Comments—(include information on repairs made prior to testing and recommended follow-up for failed tests) <br />