Laserfiche WebLink
LG .113 Vendor/Template <br />Precision (in) <br />Level 1 (low level switch) <br />Level 2 <br />Level 3 <br />Level 4 <br />Level 5 (high level switch) <br />Lower detection limit (in) <br />Level 1 (low level switch) <br />Level 2 <br />Level 3 <br />Level 4 <br />Level 5 (high level switch) <br />Model 510 Discriminating Sensor <br />Detection time <br />Fall time (sec) <br />Precision - standard deviation (in) <br />Lower detection limit (in) <br />Model 516 Discriminating Sensor <br />Detection time (sec) <br />Fall time <br />Precision - standard deviation (in) <br />Lower detection limit (in) <br />Specificity Results: <br />Manufacturer and evaluator claim sensors will respond to any liquid. No additional materials tested. <br />Page 2 of 3 <br />Manufacturer's Specifications: <br />Manufacturer states that systems require no calibration. <br />Annual functional test required. <br />Model 510 Discriminating Sensor is designed to work with Beaudreau Models 404-4, 500, and 500C Controllers. <br />Madel 516 Discriminating Sensor is designed to work with Beaudreau Models 500, 5000, and 512 Controllers. <br />Model 516 Discriminating Sensor will not work with Model 404-4 Controller. <br />Model EOS100 Discriminating Sensor is designed to work with Beaudreau Model 522 Remote Monitoring system and Model <br />522T Monitoring System. <br />Comments: <br />Models 404 and 406 Liquid Level Sensors and Models EOS100 and 516 Discriminating Sensors are reusable. <br />The polymer strip used in Model 510 Discriminating Sensor is designed to be replaceable if desired. <br />This design allows the end-user to immediately reuse the sensor by replacing the polymer strip, instead of having to wait 24 <br />to 48 hours) for the polymer strip to dry out. <br />Replacement lowers the risk of false alarms caused by the use of partially dried out polymer strips. <br />Model 516 Discriminating Sensor is designed to be placed in a sensor well in bottom of a containment sump with at least <br />one other sensor mounted higher as a high-water cut-off. <br />Both Models 510 and 516 Discriminating Sensors were not evaluated for the ability to detect a layer of hydrocarbon on <br />water. <br />EOS100 has 5 sensing points that can sense fuel or water over a 3.5 -inch range. The highest sensor (level 5) acts as a <br />high level switch. <br />If water is detected at level 5, a fuel alarm will be triggered instead of a water alarm. <br />If fuel is detected at any of the levels, a fuel alarm will be triggered. <br />The output from the system can be used to shut down the turbines when fuel is present or when water reaches the high <br />level switch. <br />Model 522 Remote Monitoring System: <br />Evaluation indicates that when threshold level of Model 406 Liquid Level Sensor, Models EOS100, 510 and 516 <br />0.005 <br />0.002 <br />0.003 <br />0.006 <br />0.002 <br />not evaluated <br />0.004 <br />0.002 <br />not evaluated <br />0.004 <br />0.002 <br />not evaluated <br />0.004 <br />0.002 <br />0.004 <br />0.536 <br />0.551 <br />0.550 <br />1.266 <br />1.226 <br />not evaluated <br />2.097 <br />2.074 <br />not evaluated <br />2.858 <br />2.895 <br />not evaluated <br />3.569 <br />3.57 <br />3.596 <br />5-10 min <br />1-2 hr <br /><1 sec <br />Replaceable <br />Replaceable <br /><1 <br /><0.0001 <br /><0.0001 <br />0.0045 <br />0.058 <br />0.058 <br />11.566 <br /><1 <br /><1 <br /><1 <br /><1 <br /><1 <br /><1 <br />0.0038 <br />0.0032 <br />0.0020 <br />0.340 <br />0.369 <br />0.389 <br />Specificity Results: <br />Manufacturer and evaluator claim sensors will respond to any liquid. No additional materials tested. <br />Page 2 of 3 <br />Manufacturer's Specifications: <br />Manufacturer states that systems require no calibration. <br />Annual functional test required. <br />Model 510 Discriminating Sensor is designed to work with Beaudreau Models 404-4, 500, and 500C Controllers. <br />Madel 516 Discriminating Sensor is designed to work with Beaudreau Models 500, 5000, and 512 Controllers. <br />Model 516 Discriminating Sensor will not work with Model 404-4 Controller. <br />Model EOS100 Discriminating Sensor is designed to work with Beaudreau Model 522 Remote Monitoring system and Model <br />522T Monitoring System. <br />Comments: <br />Models 404 and 406 Liquid Level Sensors and Models EOS100 and 516 Discriminating Sensors are reusable. <br />The polymer strip used in Model 510 Discriminating Sensor is designed to be replaceable if desired. <br />This design allows the end-user to immediately reuse the sensor by replacing the polymer strip, instead of having to wait 24 <br />to 48 hours) for the polymer strip to dry out. <br />Replacement lowers the risk of false alarms caused by the use of partially dried out polymer strips. <br />Model 516 Discriminating Sensor is designed to be placed in a sensor well in bottom of a containment sump with at least <br />one other sensor mounted higher as a high-water cut-off. <br />Both Models 510 and 516 Discriminating Sensors were not evaluated for the ability to detect a layer of hydrocarbon on <br />water. <br />EOS100 has 5 sensing points that can sense fuel or water over a 3.5 -inch range. The highest sensor (level 5) acts as a <br />high level switch. <br />If water is detected at level 5, a fuel alarm will be triggered instead of a water alarm. <br />If fuel is detected at any of the levels, a fuel alarm will be triggered. <br />The output from the system can be used to shut down the turbines when fuel is present or when water reaches the high <br />level switch. <br />Model 522 Remote Monitoring System: <br />Evaluation indicates that when threshold level of Model 406 Liquid Level Sensor, Models EOS100, 510 and 516 <br />