Laserfiche WebLink
SWRCB. January 2002 <br />8. FILL RISER CONTAINMENT SUMP TESTING <br />Page 6 of 7 <br />Facility is Not Equipped With Fill Riser Containment Sums X <br />Fill Riser Containment Sumps are Present, but were Not Tested <br />Test Method Developed By: [ ] Sump Manufacturer [ ] Industry Standard [ ) Professional Engineer <br />[ ] Other (Specify) <br />Test Method Used: [ ] Pressure [ ] Vacuum [ ] Hydrostatic <br />[ ] Other (Specify) <br />Test Equipment Used: Equipment Resolution: <br />NONE AT THIS SITE <br />Fill Sum # <br />Fill Sump # <br />Fill Sump # <br />Fill Sump # <br />Sump Diameter: <br />Sump Depth: <br />Height from Tank Top to Top of <br />Highest Piping Penetration: <br />Height from Tank Top to <br />Lowest Electrical Penetration: <br />Condition of Sump prior to <br />testing: <br />Portion of Sump Tested <br />Sump Material: <br />Wait time between applying <br />pressure/vacuum/water and <br />starting test: <br />Test Start Time: <br />Initial Reading (R1): <br />Test End Time: <br />Final Reading (Rf): <br />Test Duration: <br />Change in Reading (Rf-R1) <br />Pass/Fail Threshold or <br />Criteria: <br />Test Result: <br />fuss Fail <br />Pass Fail <br />Pass Fail <br />Pass <br />Fail <br />Is there a sensor in the sump? <br />[ Yes No [ ] NA <br />Yes No NA <br />Yes[ ]No[ ] NA <br />[ Yes [ No <br />NA <br />Does the sensor alarm when either <br />product or water is detected? <br />Yes [ ] No [ JNA <br />Yes No NA <br />Yes No NA <br />[ ] Yes [ ] No [ <br />NA <br />Was sensor removed for testing? <br />Yes No[ ] N/A <br />Yes No N/A <br />Yes No N/A <br />Yes No <br />N/A <br />Was sensor properly replaced <br />and verified functional after <br />testing? <br />[ ] Yes [ ] No [ ] N/A <br />[ ] Yes [ ] No [ ] N/A <br />[ ] Yes [ ]No [ ]N/A <br />[ ] Yes [ ]No[ <br />] N/A <br />Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />NONE AT THIS SITE <br />