Laserfiche WebLink
0 <br /> 6. PIPING SUMP TESTING <br /> Test Method Developed By: F1 Sump Manufacturer 0 Industry Standard 0 Professional Engineer <br /> El Other(Specify) <br /> Test Method Used: 0 Pressure 0 Vacuum 0 Hydrostatic <br /> El Other(Specify) <br /> Test Equipment Used: Incon TS-STS Sump Test System Equipment Resolution: 0.002" <br /> =7 Diesel <br /> Diameter: 42" <br /> Depth: <br /> r7' 6011 <br /> Sump <br /> Material: Fiberglass <br /> Height from Tank Top to Top of <br /> 24 <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> 5611 ENVRONMENTAL HEEAL H <br /> Electrical Penetration: L <br /> 7, <br /> Condition of sump prior to testing: Good <br /> Portion of Sump Tested' 4"Above Pen. <br /> Does turbine shut down when <br /> I sump sensor detects liquid(both 0 Yes 0 No ®NA E]Yes ONo ®NA nYes ONo®NA E] Yes ONo SNA <br /> product and water)?* <br /> Turbine shutdown response time N/A <br /> Is system programmed for fail-safe <br /> Oyes ONo ®NA OYes ONo ®NA OYes E]No®NA OYes ONo ®NA <br /> shutdown?* <br /> Was fail-safe verified to be <br /> 0 Yes 0 No 0 NA 0 Yes 0 No 0 NA 0 Yes 0 No ED NA 0 Yes 0 No 0 NA <br /> operational? <br /> Wait time between applying <br /> pressure/vacuum/water and starting 30 minutes <br /> test: <br /> Test Start Time: 08:59 AM <br /> Initial Reading(Ri): 5.6109 <br /> Test End Time: 09:14 AM <br /> Final Reading(RF): 5.4461 <br /> Test Duration: 15 min. <br /> Change in Reading(RF-RI): -0.1648 <br /> Pass/Fail Threshold or Criteria: 0.002" <br /> Test Result: Fail <br /> Was sensor removed for testing? Yes <br /> Was sensor property replaced and <br /> Yes <br /> verified functional after testing? <br /> Comments— (include Information on repairs made prior to testing, and reconii?iendedfollow-up for failed tests) <br /> Sensor functionality was not confirmed.This procedure is not vart of the Secondary Containment Testine scope of work. <br /> Sump is failing below electricals at penetrations. Sump not tested above electricals. <br /> If the entire depth of the sump is not tested,specify how much was tested, If the answer to pj of the questions indicated with an <br /> asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160) <br />