COMPLIANCE INFO_2005-2010 - Laserfiche WebLink

Home Browse Search

MONIRING SYSTEM CERTIF TION Use By All Jurisdictions Within the State of Califo Authority Cited: Chapter 6.7, alth and Safety Code; Chapter 16, Division 3 Title 23, alifornia Code of Regulations This form must be used to document testing and servicing of monitoring equipment. If more than one monitoring system control panel is installed at the facility, a separate certification or report must be prepared for each monitoring system control panel by the technician who performs the work. A copy of this form must be provided to the tank system owner/operator. The owner/operator must submit a copy of this form to the local agency regulating LIST systems within 30 days of test date. A. General Information Facility Name: CHEVRON #201383 (N-251 Site Address: 1960W. 11TH STREET Facility Contact Person: MGR - HELEN Make/Model of Monitoring System:TLS350 B. Inventory of Equipment Tested/Certified Check the appropriate boxes to indicate specific equipment inspected/serviced City: TRACY Contact Phone No: 836-3181 Date of Testing/Service: 04/02/2007 Work Order Number: 2248337 CA Zip: 95376 Tank ID: 1-91 Tank ID: 2-89 X In -Tank Gauging Probe. Model: MAG 0 In -Tank Gauging Probe. Model: MAG X Annular Space or Vault Sensor. Model: 208 Annular Space or Vault Sensor. Model: 208 X Piping Sump/Trench Sensor(s). Model: 208 © Piping Sump/Trench Sensor(s). Model: 208 Fill Sump Sensor(s). Model: Fill Sump Sensor(s). Model: Mechanical Line Leak Detector. Model: Mechanical Line Leak Detector. Model: X Electronic Line Leak Detector. Model: PLLD X Electronic Line Leak Detector. Model: PLLD Tank Overfill/High-Level Sensor. Model: ❑ Tank Overfill/High-Level Sensor. Model: Other (specify equipment type and model in Section E on page 2). ❑ Other (specify equipment type and model in Section E on page 2). Tank ID: 3-61 Tank ID: In -Tank Gauging Probe. Model: MAG In -Tank Gauging Probe. Model: X Annular Space or Vault Sensor. Model: 208 Annular Space or Vault Sensor. Model: X Piping Sump/Trench Sensor(s). Model: 208 Piping Sump/Trench Sensor(s). Model: Fill Sump Sensor(s). Model: H Fill Sump Sensor(s). Model: Mechanical Line Leak Detector. Model: ■ Mechanical Line Leak Detector. Model: X Electronic Line Leak Detector. Model: PLLD ❑ Electronic Line Leak Detector. Model: Tank Overfill/High-Level Sensor. Model: Tank Overfill/High-Level Sensor. Model: Other (specify equipment type and model in Section E on page 2). ❑ Other (specify equipment type and model in Section E on page 2). Dispenser : 1-2 Dispenser ID: 3-4 X❑ Dispenser Containment Sensor(s) Model: 208 0 Dispenser Containment Sensor(s) Model: 208 X❑ Shear Valve(s). X Shear Valve(s) ❑ Dispenser Containment Float(s) and Chain(s). Dispenser Containment Float(s) and Chain(s). Dispenser ID: 5-6 Dispenser ID: 7-8 X❑ Dispenser Containment Sensor(s) Model: 208 X Dispenser Containment Sensor(s). Model: 208 X❑ Shear Valve(s). FX1Shear Valve(s). Dispenser Containment Float(s) and Chain(s). Dispenser Containment Float(s) and Chain(s). Dispenser ID: 9-10 DispenserlD: 11-12 X❑ Dispenser Containment Sensor(s) Model: 208 X❑ Dispenser Containment Sensor(s). Model: 208 ❑X Shear Valve(s). X❑ Shear Valve(s). Dispenser Containment Float(s) and Chain(s). ❑ Dispenser Containment Float(s) and Chain(s). If the facility contains more tanks or dispensers, copy this form. Include information for every tank and dispenser at the facility. C. Certification I certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers' guidelines. Attached to this certification is information (e.g manufacturers' checklists) necessary to verify that this information is correct. and a Site Plan showing the layout of monitoring equipment. For any equipment capable of generating such reports, I have also attached a copy of the (Check all that apply): MX System set-upX❑ Alarm history report Technician Name (print): CHRISTIAN ELIAS Certification No.: B33785 Signature: _ License. No.: Testing Company Name: Tanknology Phone No.: (800) 800-4633 Site Address: 8501 N. MoPac Expressway, suite 400, Austin, TX 78759 Date of Testing/Servicing: 04/02/2007 Page 1 of 3 Based on CA form dated 03/01 Monitoring System Certification