COMPLIANCE INFO_2005-2010 - Laserfiche WebLink

Home Browse Search

TECH TBO110-01 BULLETIN January 5,2010 Page 1 of 3 TSA Firmware Version 1.2.8.4762 Release Notes The following changes have been made to the T5 Series Firmware as of January 5, 2010 1. Added VRM support to adjust the ISD assessment time. Previous releases had a predetermined ISD assessment time of midnight and at this time, alarms would post and dispensers would be shut down. Customers requested this time be programmable. 2. Provide Mass measurement of Product along with Density. The Product Fuel Density feature will now also display the calculated mass in both the Inventory and Delivery interfaces and reports. 3. Added Relay Control Enhancement. A Relay Diagnostic was added to the console to allow the end user to manually activate and deactivate a relay. This is useful when verifying an installation and the setup for the installation. 4. Removed modem configuration from systems without a modem. The'Modem'option is no longer in the Setup. It used to be located under'System Configuration/Modules Expected'.All modem related parameters are now on the'Configuration' page. There is a new parameter called 'Type'. For T-5 it can be set to'None'or'Internal'. For Colibri the possible values are: None, External Serial and External USB. When modem type is set to anything other than 'None', other modem parameters become available.They are the same as before.The default value for modem type is 'None', unless it is a T-5 which had the modem enabled in the setup. In this case the value of the modem type parameter is set to'Internal'. 5. Added language support for Hindi. 6. Made 3-Wire Sensor configuration automatic. The 3-Wire Sensor configuration is now part of the Setup Interface. Once the sensors are wired up,the user can go into setup and automatically detect the sensor type. 7. Made additional Database improvements. Additional improvements to database storage and backup were added to the console. These improvements were integrated into the TSA Upgrade Utility as well. 8. Added VRM support for Multi-Hose dispensers. This release provides the console with the ability to monitor the vapor recovery of individual hoses on multi-hose dispensers.The previous release would allow for and monitor a single hose per fueling point. 9. Added additional Veeder-Root Command Support. Additional Veeder-Root commands were added to support new customer POS interface software. • i206 BIR Adjusted Delivery Report • A3T Tank Setup Parameters • iCO3 Inventory Reconciliation Shift"Row" Report • i214 In-Tank Mass/Density Inventory Report • i215 In-Tank Mass/Density Delivery Report 10. Improved Printer Test Report The print test page for both the internal and external printer has been improved to show version information and international support. Franklin Fueling Systems