Laserfiche WebLink
SPECIFICATIONS: <br />OUTER RING: Heavy cast iron. <br />SKIRT: 14 gauge galvanized sheet metal <br />COVER: 3/8" floor plate with 12" x 13" fill covers, reinforced will <br />withstand tanker weight, 24,000 lbs. <br />FILL COVERS: Pull handles for easy removal. <br />POPPET VALVE ASSEMBLY: Spring-loaded with high nitrile rubber disc. <br />GASKET: Tube flange design, low swell high nitrile rubber with stainless <br />steel worm clamp. <br />GASKET: Viton available upon.request. <br />BUNGS: Minimum 10" q MAXIMUM 16" CL. <br />PATENT PENDING <br />PART NO. DESCRIPTION <br />239 36" ROUND FIL-SPIL CONTAINMENT BOX; <br />ONE OF THE FOLLOWING NUMBERS MUST BE <br />ORDERED WITH #239 FOR A TWO POINT SYSTEM <br />(NO ADDITIONAL COST) <br />262 12" CENTERS, 7" RADIUS <br />263 14" CENTERS, 8" RADIUS <br />264 16" CENTERS, 9" RADIUS <br />OPTIONS AT ADDITIONAL COST, WHEN REQUIRED <br />260 <br />BAFFLE -10 GALLON SEPARATION <br />(L.A. CITY REQUIREMENT ONLY) <br />271 <br />5 GALLON CAPACITY APPLIED TO <br />COAXIAL, ONE RISER SYSTEM <br />272 <br />10 GALLON CAPACITY APPLIED TO <br />flow. <br />COAXIAL, ONE, RISER SYSTEM <br />273 <br />20 GALLON CAPACITY APPLIED TO TWO, <br />area. <br />OR ONE RISER SYSTEM REQUIRING 20 <br />• Flange type gasket allows for complete freedom of movement, either side to <br />GALLON CONTAINMENT <br />274 <br />40 GALLON CAPACITY APPLIED TO TWO, <br />• 4" x.17" schedule 40 pipe w/welded pipe nipple and a 90" swing flair fitting. <br />OR ONE RISER SYSTEM REQUIRING 40 <br />• Stainless steel outside braid and Teflon inner hose with 3/4" male and 3/4" <br />GALLON CONTAINMENT <br />275 <br />TANK GAUGE COVER—USED WITH PART <br />• Screws and gasket to assure water tight. <br />#272, AT NO CHARGE <br />276 <br />TANK GAUGE COVER—USED WITH TWO <br />RISER SYSTEM AND THIRD OPENING <br />NEEDED TO READ GAUGE <br />277 <br />LESS CONTAINMENT—USED WHEN <br />CONTAINMENT IS NOT NEEDED <br />278 <br />WATER DRAIN—USED WHEN ABOVE <br />GRADE WATER NEEDS TO BE DIRECTED <br />AWAY FROM THE TANK AREA <br />279 <br />PIPE PLUG—USED WHEN PLUG IS <br />NEEDED INSTEAD OF POPPET VALVE. <br />280 <br />4" x 3" RUBBER REDUCER ALLOWS USE <br />OF A 3" RISER <br />281 <br />4"x 2" RUBBER REDUCER ALLOWS USE <br />OF A 2" RISER <br />NOTE: See Page "D" in back of catalog on examples on <br />ordering Fii-Spit Boxes. <br />FEATURES: <br />• Special design on cover will not allow dirt or water to enter the <br />containment area. <br />• Allows for vapors to escape while the fill cover'is on. <br />• Flush mount lift ring on covers. <br />• Standard 10 gallon containment and poppet valve for two riser systems. <br />• All water drains onto the ground, not Into the containment area. <br />• Spring-loaded valve assembly with pull -chain to allow fluid to drain through a <br />full 5/6" hose. <br />• Drain hose is designed in a downward position at all times allowing for a rapid <br />flow. <br />• Tube flanged rubber gasket allows replacement from inside the containment <br />area. <br />• Flange type gasket allows for complete freedom of movement, either side to <br />side, or up and down, without damage to pipe riser or tank. <br />• 4" x.17" schedule 40 pipe w/welded pipe nipple and a 90" swing flair fitting. <br />• Stainless steel outside braid and Teflon inner hose with 3/4" male and 3/4" <br />female aircraft fittings. <br />• Screws and gasket to assure water tight. <br />• Unit can be ordered with pipe plug and up to 40 gallon containment. <br />O.D. ► <br />r 401/4" <br />12" <br />341/4" <br />1-4 1. D. ®) <br />1 <br />10 GAL. — 22' , 24 - R GAL. <br />20 GA L. — 32' 34'- 20 GAL.. <br />4—j i <br />19388 <br />