Laserfiche WebLink
TECH <br /> TBO110-01 <br /> BULLETIN January 5,2010 <br /> Page 1 of 3 <br /> TSA Firmware Version 1.2.8.4762 Release Notes <br /> The following changes have been made to the T5 Series Firmware as of January 5, 2010 <br /> 1. Added VRM support to adjust the ISD assessment time. <br /> Previous releases had a predetermined ISD assessment time of midnight and at this time, alarms would <br /> post and dispensers would be shut down. Customers requested this time be programmable. <br /> 2. Provide Mass measurement of Product along with Density. <br /> The Product Fuel Density feature will now also display the calculated mass in both the Inventory and <br /> Delivery interfaces and reports. <br /> 3. Added Relay Control Enhancement. <br /> A Relay Diagnostic was added to the console to allow the end user to manually activate and deactivate a <br /> relay. This is useful when verifying an installation and the setup for the installation. <br /> 4. Removed modem configuration from systems without a modem. <br /> The'Modem'option is no longer in the Setup. It used to be located under'System Configuration/Modules <br /> Expected'.All modem related parameters are now on the'Configuration' page. There is a new parameter <br /> called 'Type'. For T-5 it can be set to'None'or'Internal'. For Colibri the possible values are: None, External <br /> Serial and External USB.When modem type is set to anything other than 'None', other modem parameters <br /> become available.They are the same as before.The default value for modem type is'None', unless it is a <br /> T-5 which had the modem enabled in the setup. In this case the value of the modem type parameter is set <br /> to'Internal'. <br /> 5. Added language support for Hindi. <br /> 6. Made 3-Wire Sensor configuration automatic. <br /> The 3-Wire Sensor configuration is now part of the Setup Interface. Once the sensors are wired up,the <br /> user can go into setup and automatically detect the sensor type. <br /> 7. Made additional Database improvements. <br /> Additional improvements to database storage and backup were added to the console. These <br /> improvements were integrated into the TSA Upgrade Utility as well. <br /> 8. Added VRM support for Multi-Hose dispensers. <br /> This release provides the console with the ability to monitor the vapor recovery of individual hoses on <br /> multi-hose dispensers.The previous release would allow for and monitor a single hose per fueling point. <br /> 9. Added additional Veeder-Root Command Support. <br /> Additional Veeder-Root commands were added to support new customer POS interface software. <br /> • i2013 BIR Adjusted Delivery Report <br /> • A3T Tank Setup Parameters <br /> • iCO3 Inventory Reconciliation Shift"Row" Report <br /> • i214 In-Tank Mass/Density Inventory Report <br /> • i215 In-Tank Mass/Density Delivery Report <br /> 10. Improved Printer Test Report <br /> The print test page for both the internal and external printer has been improved to show version <br /> information and international support. <br /> 0 Franklin Fueling Systeme <br />