Laserfiche WebLink
Console Installation Selecting a Mounting Location <br /> Console Installation <br /> Selecting a Mounting Location <br /> t � • <br /> Explosive vapors or flammable liquids could be present near locations <br /> where fuels are stored or being dispensed.The console is not <br /> explosion proof. <br /> .� An explosion or fire resulting in serious injury or death, property loss <br /> and equipment damage could occur if the console is installed in a <br /> volatile, combustible or explosive atmosphere(Class 1, Division 1 or 2). <br /> Do not install this console in a volatile,combustible, or explosive <br /> atmosphere. <br /> Select a mounting location on the inside of any building.The console must be <br /> protected from severe vibration,extremes in temperature and humidity,rain,and other <br /> conditions that could harm computerized electronic equipment.The console's <br /> operating temperature range is 32 to 113°F and its storage temperature range is 15 to <br /> 113°F. <br /> The mounting surface should be strong enough to support the console's weight which <br /> could exceed 40 pounds with a full complement of modules. <br /> You should also consider wall space for routing the power wiring conduits and probe <br /> and sensor wiring conduits that must be connected to the console. <br /> Mounting the Console <br /> Install the console fastening devices to the mounting surface using the hole pattern <br /> (16"x 12")shown in Figure 2.Up to 1/4"diameter screws may be used. <br /> Mount the console to the mounting surface using the four mounting flanges on the <br /> back of the unit.Install metal conduit(3/4, 1,or 1-1/4"I.ES.)between the console and <br /> the power panel.Figure 2 shows the four designated knockouts(2 on top and 2 on <br /> bottom)through which power wiring can safely enter the console. <br /> 7 <br />