Laserfiche WebLink
Xerxes Corporation-Tank Accessories http://www.xerxescorp.com/noframes/tacces.htm <br /> 9 <br /> rfYfs <br /> Ff i <br /> 1 <br /> r <br /> ■ r <br /> r r <br /> i <br /> r <br /> r <br /> r <br /> r r <br /> M.Fiberglass Bulkhead Coupling Kit N.Electrical Bulkhead Coupling Kit <br /> The 3"FRP coupling is a two-piece fitting that is bonded to the attached The t"electrical coupling kit is a three-piece fitting which is bonded to the <br /> collar riser by the contractor.The male and female sections of the FRP attached collar riser by the contractor.The male and female sections of the <br /> coupling are threaded together to hold the fitting in place while the electrical coupling are threaded together to hold the fitting in place while <br /> adhesive cures.Each kit includes one 3"FRP coupling,adhesive and the adhesive cures.Each kit includes four 1"steel couplings,adhesive and <br /> instructions. instructions. <br /> 0.Fiberglass Isolation Riser P.Fiberglass Fill Tube <br /> The fiberglass isolation riser provides a non-corroding access from the Fill tubes are screwed into the bottom of the 6"x 4"NPT double-tapped <br /> street box down to the top of the tank.Since the bottom is open the riser reducer bushing that is located in a 6"service fitting.The bottom of the fill <br /> will fill with water if water surrounds the outside of the riser.The riser is tube is located 4"above the bottom of the tank with the open end slanted <br /> available in lengths up to 6 feet in height.Use of only one riser will be 450.The top of the 4"NPT service fitting is closed with a 4"cast-iron plug <br /> permitted on sizes 600 through 3,000 gallons.Maximum use of two risers to facilitate shipping and testing.A 6"NPT fitting is provided to <br /> will only be allowed on 4,00 gallon-6'diameter or 6,000 gallon 8' accommodate the fiberglass fill tube. <br /> diameter or larger tanks. <br /> 5 of 7 05/19/2000 3:01 PM <br />