Laserfiche WebLink
k" K L E IN F E L D E R <br /> A-b LEACHATE MONITORING <br /> 1 The leachate nser or wells are first opened and allowed to equilibrate with the <br /> atmosphere <br /> 2 The leachate elevation is then measured from a set location using a conductivity-based <br /> water-level meter The level is generally measured from a surveyed mark on the north <br /> nm of the casing <br /> 3 A leachate sample is then collected using a clean, disposable bailer <br /> 4 The sample is labeled and immediately stored in an iced cooler pending transport to the <br /> analytical laboratory The sample is logged on a chain-of-custody <br /> A-7 SURFACE WATER MONITORING <br /> I Prior to collecting surface water samples, the depth of water is estimated at a designated <br /> location in the surface water body <br /> 2 Surface water samples are collected directly from the stream or surface water using a <br /> clean unpreserved plastic bottle, disposable bailer, bailer, coliwasa, DipstikTM, dipper, <br /> peristaltic pump, etc , or by directly filling the sample containers Sampling equipment <br /> will either be disposable, dedicated or decontaminated in accordance with the above- <br /> defined decontamination protocols <br />' 3 Care is taken not to disturb the stream bottom and introduce sediment in the sample The <br /> fluid is then poured into appropriate preserved or unpreserved bottles for the requested <br /> analysis <br /> 4 The sample is labeled and immediately stored in an iced cooler pending transport to the <br />' analytical laboratory The sample is logged on a chain-of-custody <br />' A-8 TANK REMOVAL SAMPLING <br /> A-8 1 Collection of Soil Sami3les and Laboratory Analysis <br /> Soil and water samples will be collected during the tank removal operations in accordance with <br /> 1 the current Leaking Underground Fuel Tank Field (LUFT) Manual and the Tri-Regional <br /> Guidelines issued by the California Regional Water Quality Control Board (RWQCB) <br /> A Kleinfelder, environmental geologist will be on site during the tank removal activities to <br /> collect soil samples for qualitative field screening and laboratory analysis Tank excavation soil <br /> samples will be obtained by scraping the sidewalls or excavation bottom at the desired locations <br /> t18748 T02/ST02R420 Page B-7 <br /> (02002 Klemfelder, Inc August 29,2002 <br /> 1 <br />