SU0013426 - Laserfiche WebLink

Home Browse Search

Section 9-910.18 Lot Numbers. All lots, including too utility lots, shall be numbered consecutively, commencing with the number 91,' except as otherwise approved by the County surveyor, with no omissions or duplications. Each numbered lot shall be shown to scale entirely on one sheet. SECTION _. Section 9-910.19, Chapter 9-910, Division 9, Title 9, of the San Joaquin County Ordinance Code is hereby amended by amending subsection 9-910.19(a) to read as follows: Section 9-910.19 Curve Data. The following curve data shall be shown on the final map: (a) Terminal Radii. The arc length, chord length and bearing, radius, and total central angle, and bearings of terminal radii of each curve, including overall curves. SECTION _. Section 9-910.22, Chapter 9-910, Division 9, Title 9, of the San Joaquin County Ordinance Code is hereby amended to read as follows: Section 9-910.22 Limited Access Designation. When the vehicular access rights from any lot to appropriately designated roads are or will be restricted by a subdivision,such rights, if not already a matter of record, shall be offered for dedication to the County of San Joaquin by an appropriate statement on the title sheet of the final map. A note which clearly defines the extent and nature of the restriction shall be lettered on the final map foraRy adjacent to the lots affected. SECTION _. Section 9-915.2, Chapter 9-915, Division 9, Title 9, of the San Joaquin County Ordinance Code is hereby amended to read as follows: Section 9-915.2 Parcel Map Required. The filing of a parcel map, in conformance with the tentative map or vesting tentative map of an approved Minor Subdivision application, shall be a condition of approval of any Minor Subdivision application except as provided in Section 9-915.9. SECTION . Section 9-915.3, Chapter 9-915, Division 9, Title 9, of the San Joaquin County Ordinance Code is_hereby amended to read as follows: Section 9-915.3 Preparation. The parcel map shall be prepared by, or under the direction of, a registered civil engineer, duly licensed to practice land surveying, or a licensed land surveyor; shall show the location of streets and property lines bounding the property; and shall conform to all of the following provisions: (a) RFiRtiRg Legibility. It shall be legibly drawn, printed or reproduced by a process guaranteeing a permanent record in black on tracing cloth or polyester base film. Certificates, statements, affidavits, and acknowledgements may be legibly stamped or printed upon the map with opaque ink. If ink is used on polyester base film, the ink surface shall be coated with a suitable substance to assure permanent legibility. (c) Feature Identification. Each parcel shall be numbered, and each block may be numbered or lettered. Each street road shall be named or otherwise designated. (d) Identification of Parcels. Parcels shall be identified as follows: (1) The exteriorrg oss boundary of the land included within the subdivision shall be indicated by distinctive symbols and clearly designated.