Laserfiche WebLink
'&� BIO-CIRCLE L <br /> BIO-CIRCLE <br /> L/ <br /> A division of <br /> MAW Surface Technologies <br /> Section 7. Handling and storage <br /> Precautions for safe handling <br /> Protective measures Put on appropriate personal protective equipment(see Section 8). <br /> Advice on general Eating, drinking and smoking should be prohibited in areas where this material is <br /> occupational hygiene handled, stored and processed. Workers should wash hands and face before eating, <br /> drinking and smoking. See also Section 8 for additional information on hygiene <br /> measures. <br /> Conditions for safe storage, Store in accordance with local regulations. Store in original container protected from <br /> including any direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials <br /> incompatibilities (see Section 10) and food and drink. Keep container tightly closed and sealed until <br /> ready for use. Containers that have been opened must be carefully resealed and kept <br /> upright to prevent leakage. Do not store in unlabeled containers. Use appropriate <br /> containment to avoid environmental contamination. <br /> Section 8. Exposure controls/personal protection <br /> Control parameters <br /> Occupational exposure limits <br /> None. <br /> Appropriate engineering Ensure adequate ventilation. No personal respiratory protective equipment normally <br /> controls required. <br /> Environmental exposure Emissions from ventilation or work process equipment should be checked to ensure <br /> controls they comply with the requirements of environmental protection legislation. <br /> Individual protection measures <br /> Hygiene measures Wash hands, forearms and face thoroughly after handling chemical products, before <br /> eating, smoking and using the lavatory and at the end of the working period. <br /> Appropriate techniques should be used to remove potentially contaminated clothing. <br /> Wash contaminated clothing before reusing. <br /> Eyelface protection Safety eyewear complying with an approved standard should be used when a risk <br /> assessment indicates this is necessary to avoid exposure to liquid splashes, mists, <br /> gases or dusts. If contact is possible, the following protection should be worn, unless <br /> the assessment indicates a higher degree of protection: chemical splash goggles. <br /> Skin protection <br /> Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be <br /> worn at all times when handling chemical products if a risk assessment indicates this is <br /> necessary. Considering the parameters specified by the glove manufacturer, check <br /> during use that the gloves are still retaining their protective properties. It should be <br /> noted that the time to breakthrough for any glove material may be different for different <br /> glove manufacturers. In the case of mixtures, consisting of several substances, the <br /> protection time of the gloves cannot be accurately estimated. <br /> Recommended: Nitrile gloves 0.4 mm thick, permeation time 480 minutes. <br /> Body protection Personal protective equipment for the body should be selected based on the task being <br /> performed and the risks involved and should be approved by a specialist before <br /> handling this product. <br /> Other skin protection Appropriate footwear and any additional skin protection measures should be selected <br /> based on the task being performed and the risks involved and should be approved by a <br /> specialist before handling this product. <br /> Tel:+1-888-GHS-7769(447-7769)/+1-450-GHS-7767(447-7767) 4/10 <br /> to KMK Regulatory Services www.kmkregservices.com www.askdriuc.com www.ghssmart.com <br />