Laserfiche WebLink
Section 8 . Exposure controls/ personal protection <br /> Eye/face protection Safety eyewear complying with an approved standard should be used when a risk <br /> assessment indicates this is necessary to avoid exposure to liquid splashes , mists , <br /> gases or dusts . If contact is possible , the following protection should be worn , unless <br /> the assessment indicates a higher degree of protection : safety glasses with side- <br /> shields . If operating conditions cause high dust concentrations to be produced , use <br /> dust goggles . <br /> Skin protection <br /> Hand protection Chemical -resistant , impervious gloves complying with an approved standard should be <br /> worn at all times when handling chemical products if a risk assessment indicates this is <br /> necessary. Considering the parameters specified by the glove manufacturer, check <br /> during use that the gloves are still retaining their protective properties . It should be <br /> noted that the time to breakthrough for any glove material may be different for different <br /> glove manufacturers . In the case of mixtures , consisting of several substances , the <br /> protection time of the gloves cannot be accurately estimated . <br /> Body protection Personal protective equipment for the body should be selected based on the task being <br /> performed and the risks involved and should be approved by a specialist before <br /> handling this product . <br /> Other skin protection Appropriate footwear and any additional skin protection measures should be selected <br /> based on the task being performed and the risks involved and should be approved by a <br /> specialist before handling this product . <br /> Respiratory protection Based on the hazard and potential for exposure , select a respirator that meets the <br /> appropriate standard or certification . Respirators must be used according to a <br /> respiratory protection program to ensure proper fitting , training , and other important <br /> aspects of use . <br /> Section 9 . Physical and chemical properties <br /> Appearance <br /> Physical state Solid . <br /> Color Not available . <br /> Odor Not available . <br /> Odor threshold ; Not available . <br /> pH Not available . <br /> Melting point/freezing point Not available . <br /> Boiling point/boiling range Not available . <br /> Flash point Closed cup : > 93 . 3 ° C (> 199 . 9 ° F ) <br /> Evaporation rate Not available . <br /> Flammability ( solid , gas ) Not available . <br /> Lower and upper explosive Not available . <br /> (flammable) limits <br /> Vapor pressure Not relevant/applicable due to nature of the product . <br /> Vapor density Not available . <br /> Relative density 1 . 52 <br /> Solubility Not available . <br /> Partition coefficient : n - Not available . <br /> octanol/water <br /> Auto-ignition temperature Not available . <br /> Decomposition temperature Not available . <br /> Viscosity Kinematic (40 ° C ( 104 ° F )) : > 0 . 205 cm2/s (> 20 . 5 cSt) <br /> Molecular weight Not applicable . <br /> Aerosol product <br /> Heat of combustion 0 . 16 kJ/g <br />