Laserfiche WebLink
POLYLOK 24" BAFFLED D-BOX <br /> PART NO. 3017-B24 <br /> MATERIAL- HDPE <br /> NOMINAL WALL THICKNESS - .25" <br /> 5.7(r <br /> z.uu INLET WATER LEVEL <br /> BAFFLE 0. 4"INLET <br /> 7.00' <br /> 3.0 O�' 2.00' <br /> 2"x 3"OUTLETS <br /> 4"OUTLET <br /> 4 PLCS. <br /> 1-7 OUTLET PORTS AVAILABLE <br /> INSTRUCTION FOR ASSEMBLING 24" BAFFLED D-BOX <br /> KENTUCKY APPROVAL# KY-PE7-0165 SEAL INSTALLED FROM INSIDE BOX <br /> 1. DETERMINE INLET LOCATION NUT INSTALLED FROM OUTSIDE BOX <br /> (2ND HOLE FROM THE TOP) <br /> 2. FROM INSIDE THE BOX, DRILL A 1/4" 26.79 dia <br /> PIILOT HOLE THROUGH THE SIDE WALL AT <br /> THE DIPPLED LOCATION MARKING THE CENTER <br /> 3. USING A 5"-5 1/4" HOLE SAW CUT OUT HOLE <br /> FROM THE OUTSIDE THE BOX <br /> 4. DETERMINE WHICH OUTLETS ARE TO BE USED <br /> (ANY OF THE ONES 2ND FROM THE BOTTOM) <br /> 5. CUT OUT THE OUTLETS USING STEP 2 AND 3 <br /> 6. INSTALL POLYLOK D-BOX SEALS AT ALL OPENINGS <br /> FROM INSIDE THE BOX <br /> INSTALL NUTS AND TIGHTEN FOR A WATERTIGHT <br /> SEAL FROM OUTSIDE THE BOX TOP NO COVER <br /> 7. ON INLET,TEAR OUT 4"TEAR OUT ON SEAL <br /> 8. SLIDE INLET PIPE THROUGH SEAL AND GLUE BAFFLE <br /> ON THE END <br /> 9. TEAR OUT THE REMAINING OUTLET SEALS AS IN STEP 7 <br />