COMPLIANCE INFO_2019 - Laserfiche WebLink

Home Browse Search

tank is fitted with a an 18 inch threaded manway with a 4-inch atmospheric vent on the primary tank,which is properly sized to this tank and the venting requirements as annotated for the desien by Snyder Industries. 15. AST secondary containment(material/design/listed) AST has secondary containment via single wall construction to completely capture product introduced into primary vessel. Secondary containment is via an impermeable steel berm,which has no openings other than the top,which was inspected,was tested,is intact and both AST and the berm are suitable for continued usaee. Leak detection is visually ascertained via visual inspection of secondary containment area. Berm containment capacity is approximately 450 gals. 16. Damage to AST or systems. No damage reported by Owner/Operator. Upon inspection,no evidence of weld breaks, punctures,cracks,or other structural damage to the berm. Upon inspection, there was no evidence of cracks,breaks,punctures or other structural damaee to the primary vessel. Leak detection is assured via inspections of the secondary containment. Poly thickness measured to 7.8 mm. average. Steel thickness of the berm was measured to .110 in. thickness,which would be in excess of steel thickness minimums under UL 142. 17.Comments Tank has a 1 '/4 in. closed fittine at base of tank. Tank had approximately 10 gals. of product at the time of the inspection. a. Dimensions of AST: Primary Vessel= 300 eallons capacity total Dimensions: Primary Tank: 38 in.Diam X 67 in. L./ lin. crown top ( 16 in. openine for product removal. Secondary Berm: 60 in.W X 73 in. L X 24 in.Ht b. Product stored: used (waste) Coolant: Specific Gravity=1.03 c. ( 1 ) 4 in. atmospheric vent on primary containment( 0 ) in. emergency vent on primary vessel d. ( 0 ) in. atmospheric vent on secondary containment( 0 1 in. emergency vent on secondary vessel PE certification 1 certify under penalty of law that this document and all attachments were prepared under my direction or supervision in accordance with a system designed to assure that qualified personnel properly gather and evaluate the information submitted. Based on my inquiry of the person or persons who manage the system, or those persons directly responsible for gathering the information, the information submitted is, to be the best of my knowledge and belief, true, accurate, and complete. 1 am aware that there are significant penalties for submitting false information, including the possibility of fine and imprisonment for knowing violations. I have reviewed the data and confirm it complies //does not comply_with CCR section 66265.192(k) Q�pFESS/pNq � T /� `^yam, Printe e of Re 'stereAPE �y aL111- M Ln CD z Signature of Registered PE -30 087 EXP,. -30- 0 lqr CI Q 0 A �J (seal)Date /223�19 Registration Number j� 1 State