COMPLIANCE INFO_2010 - Laserfiche WebLink

Home Browse Search

Secondary Containment Vacuum Sensing System Maximize protection with a vacuum w monitored secondary containment :• d system. A Secondary Containment Vacuum Features and Benefits Facilitates periodic operability testing Sensing System for use with Veeder6 Sati• Cenifted sfy Reqqto meet uirements Leverage Existing Ueeder-Root Systems California's requirement for Root's ATG Systems. The Secondary Uses STP as the vacuum source and works with Containment Vacuum Sensing (SCVS) ms aondary space g 2481�g for tanks and lines Redjacket and FE STPs • Installs in the STP slurp and connects to the System is designed to detect leaks in double- • Satisfies the requirements for Class I Leak console via intrir►Qcally safe wiring walled tanks and piping systems while Detection as defined by the European . Able to share wiring conduit with other helping to contain a release of product while Standard EN 13160-2 Ueeder-Root intrinsically safe(IS)probes and under vacuum.The system consists of: • 3rd Patty,National Work Group and LG113 sensors includingor line leak sensors listed �P • Interfaces to the Smart Sensor Interface with • Vacuum Sensors,connected to tank, Reduce Exposure to Risk Embedded Pressure Module Alarms when vacuum cannot be maintained Provides for positive shut down of pressurized sump or piping interstices lines when required • A Submersible Turbine Pump(STP), or when replenish rate exceeds 85 liters per hour . Simple installation,no need to mess with brine The systern alarms when liquid is detected in to provide a source of vacuum the secondary spa- • A Smart Sensor Interface with Embedded Pressure Module in a TLS-350 Operating Temperature Rating: Console Capability Monitoring System -25 degrees C to+70 degrees C The Vacuum Sensor is compatible with the following consoles: Cable Length: console The Vacuum Sensor is interfaced to Veeder- 8 feet TLS-350R/EMC w/BIR' Root's TLS-350 Monitoring System via TLS-350 Plus/EMC Enhanced` intrinsically safe wiring to provide system Sensor Dimensions: TLS-350/EMC' replenish rate,alarm,and diagnostic `Upgrade Note:The Vacuum Sensor System requires status,re P g 5"high x 5"wide 2"deep the console to have version 24C software(or greater) information. along with an ECPU2 or ECPU w/NVMEM 1 board. Standard Models Vacuum Sensor Kits are available in a variety Veeder-Root P/N Description of models: 330020-467 4 Vacuum Sensor Kit'for steel tank 330020-468,-469,-470,-471 4 Vacuum Sensor Kit'for fiberglass tanks(4',6',8',10) 330020-486 4 Vacuum Sensor Kit'for no tank • For monitoring double-walled piping 330020-472 3 Vacuum Sensor Kit"for steel tank 330020-473,-474.-475.-476 3 Vacuum Sensor Kit'for fiberglass tanks(4',6',8',10) and sump interstices 330020-485 3 Vacuum Sensor Kit'for no tank • For monitoring double-walled steel tank 330020-479 2 vacuum Sensor Kit'for steel tank interstices(see back page) 330020-481,-482,-483,-484 2 vacuum Sensor Kit'for fiberglass tanks(4',6',8',10) 330020-480 2 Vacuum Sensor Kit"for no tank • For double-walled fiberglass tanks 330020-495 1 Vacuum Sensor Kit*for no tank 857280-100 vacuumSensor for piping&sumps These kits differ in the number of vacuum 857280-200 vacuum Sensor for steel tanks 857280-301,-362,-303,-304 Vacuum Sensor for fiberglass tanks(4',6',8',10') sensors and the configuration of associated 330020-448 Mounting Kit liquid sensors. An inline kit mounted liquid 332217-001 Relief Valve Assembly 332250-001 Smart Sensor w/Embedded Pressure Sensor Module(7 Channel)" sensor is used for Vacuum Sensors monitoring piping and sumps. An external Accessories Part Description Quantity/Length Part Number 1/4"NPT Barbed Fittings 3 330020-487 liquid sensor(to be installed in the secondary 1/4"NPT Barbed Fittings 15 330020-488 space at the bottom of the tank)is provided 1/4"NPT Barbed Fittings 25 330020-489 with one of the Vacuum Sensors in the steel Barbed Tee 1 576008-657 Vacuum Hose 25 25' 332310-001 and fiberglass tank kits to monitor the tank. Vacuum Hose 50' 50' 332310-002 Vacuum Hose 100' 100' 332310-003 3—Way Ball Valve 1 576008-649 Schrader Valve Barbed Fitting 3 330020-496 Schrader Valve Barbed Fitting 15 330020-497 Kits include mounting bracket,6'of vacuum hose,relief valve assembly(d required)and the appropriate number of liquid sensors, 3-way bat valves, barbed fdfings and hose clamps so that each vacuum sensor can monitor a single tank,sump or piping interstices. The Vacuum Sensing System requires one 7 channel Smart Sensor Interface with Embedded Pressure Module,8 channel Smart Sensor Modules(p/n 329356-004)can be used for Vacuum Sensors eight and above. For more information call: 1-888-561-7942 VEEDER-ROOT