Laserfiche WebLink
1 Repair kit Installation ln,,tructiow� <br /> (For Continuousl,N Nlonitored Sump,) <br /> STEP I Locate the leaking fitting and prepare as much access as possible <br /> for the repair. <br /> STEP 2 Remove the interior flex boot and slide it back on the pipe as far <br /> as possible to make access for the repair. <br /> STEP 3 Install the split repair band around the pipe and cut the strap to -� <br /> the desired length. The strap should fit loosely around the <br /> secondary pipe. Apply Blue Seal Glue to both edges of the strap <br /> and hold it together until it is fully bonded. Position the strap so <br /> that the communication tubing is located at the 6 o'clock position. <br /> STEP 4 The communication tubing should be long enough to extend from <br /> the bottom of the strap down to the interstitial opening of the <br /> double walled sump.Cut the communication strap to the desired <br /> length and slide the repair band into the center of the fitting and <br /> ensure that the tubing is positioned directly over the interstitial <br /> opening between the housing tabs. <br /> BLUELINE TECHNOLOGIES LLC - 265 BDrive, • <br /> . . . .. <br />