Laserfiche WebLink
SWRCB, January 2002 <br />5. SECONDARY PIPE TESTING <br />Page __ of <br />Test Method Developed By: <br />X Piping Manufacturer ❑ Industry Standard ❑ Professional Engineer <br />❑ Other (Spec) <br />Test Method Used: <br />X Pressure <br />❑ Other (Spec) <br />❑ Vacuum <br />❑ Hydrostatic <br />Test Equipment Us*Pressure Gauges in Psi/Nitrogen <br />Piping Run #1 <br />Piping Run #2 <br />Equipment Resolution: 1/10-15 Psi <br />Piping Run #3 Piping Run # <br />Piping Material:Fiberglass <br />Fiberglass <br />Fiberglass <br />Piping Manufacturer: <br />Smith <br />Smith <br />Smith <br />Piping Diameter: <br />4" <br />3" <br />3" <br />Length of Piping Run: <br />Approx. 10' <br />Approx. 20' <br />Approx. 6' <br />Product Stored: <br />Diesel <br />Diesel <br />Regular 87 <br />Method and location of <br />piping -run isolation: <br />Test boot at STP#1 <br />Test boot at STP#1 <br />Test boot at STP#2 <br />Wait time between applying <br />pressure and starting test: <br />15 Minutes <br />15 Minutes <br />15 Minutes <br />Test Start Time: <br />11:30 <br />11:20 <br />11:10 <br />Initial Reading (RI): <br />3 Psi <br />3 Psi <br />3 Psi <br />Test End Time: <br />12:30 <br />12:20 <br />12:10 <br />Final Reading (RF): <br />3 Psi <br />3 Psi <br />3 Psi <br />Test Duration: <br />1 Hour <br />1 Hour <br />1 Hour <br />Change in Reading (RF-Ri): <br />0 Psi <br />0 Psi <br />0 Psi <br />Pass/Fail Threshold or <br />Criteria: <br />No Loss in Psi <br />No Loss in Psi <br />No Loss in Psi <br />Test Result: <br />X Pass D Fail <br />X ]Pass 0 Fail <br />X Pass 0 Fail ='0 PassD Fail <br />Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />