Laserfiche WebLink
61SALP Rotatable Product Adaptor <br />INSTALLATION INSTRUCTIONS <br />(25 mm) <br />CK dG <br />41 <br />LL <br />...... .... <br />Stop I <br />The riser nipple in the spill container must be out square and deburred. See drawing note for the correct distance <br />between the top of the nipple and finished grade. (Optional: Use a OPW FSA -400 Face Seal Adapter with nipple. <br />Add 3-1/4" to distance from top of nipple to finish grade). <br />Stop 2 (Optional) <br />Apply pipe dope to the nipple. Pipe dope to be non -hardening, gasoline resistant pipe thread seal compound. <br />Stop 3 <br />Tighten the Rotatable Adaptor onto the nipple with a torque of 90 ft -lbs min. to 110 ft -lbs max this will be enough <br />torque to seat and seal the gasket. Use an OPW 61 SA -TOOL to install rotatable adaptor. <br />A <br />P.O. Box 405003 * Cincinnati, Ohio 45240-5003 <br />1400-422-2525 Domestically <br />513-870-3315 Internationally <br />www.opw-fc.com <br />Copyright, 2002 - OPW Fueling Components Inc., Cincinnati, OH <br />Printed in U.S.A. p1n H12712PA- 9/02 <br />OPW Fueling Components - Phase I Vapor Recovery System — VR -102-A <br />Product <br />1-2100 Series <br />Cap <br />See Spill Container w/ <br />Note Drain Valve <br />Below <br />Note: Use only a factory <br />made nipple. Nipple must be <br />cut square and deburred to <br />Note: Top of Nipple to Finish Grade for <br />provide a suitable sealing <br />OPW Rotatable Product Adaptor: <br />surface. (Optional: Use <br />61 SALP: 6-3/4" (172 mm) <br />OPW FSA -400 with nipple) <br />Stop I <br />The riser nipple in the spill container must be out square and deburred. See drawing note for the correct distance <br />between the top of the nipple and finished grade. (Optional: Use a OPW FSA -400 Face Seal Adapter with nipple. <br />Add 3-1/4" to distance from top of nipple to finish grade). <br />Stop 2 (Optional) <br />Apply pipe dope to the nipple. Pipe dope to be non -hardening, gasoline resistant pipe thread seal compound. <br />Stop 3 <br />Tighten the Rotatable Adaptor onto the nipple with a torque of 90 ft -lbs min. to 110 ft -lbs max this will be enough <br />torque to seat and seal the gasket. Use an OPW 61 SA -TOOL to install rotatable adaptor. <br />A <br />P.O. Box 405003 * Cincinnati, Ohio 45240-5003 <br />1400-422-2525 Domestically <br />513-870-3315 Internationally <br />www.opw-fc.com <br />Copyright, 2002 - OPW Fueling Components Inc., Cincinnati, OH <br />Printed in U.S.A. p1n H12712PA- 9/02 <br />OPW Fueling Components - Phase I Vapor Recovery System — VR -102-A <br />