COMPLIANCE INFO_1998-2002 - Laserfiche WebLink

Home Browse Search

UNDERGROUND STORAGE TANK MONITORING PROGRAM I.WRITTEN MONITORING PROCEDURES 1. Site Name: 7-Eleven Facility No. 20632 2. Site Address: 4627 Davinci Drive, Stockton, CA 95207 3. Describe the frequency of Performing the monitoring method. This facility has Single Wall Steel Tanks which are equipped with an automatic tank gauge (ATG). The ATG monitors the system constantly and test the tanks monthly to obtain a valid monthly test(tank capacity between 50-90%full,4-hour wait time between deliveries and 6-hour test time). The piping system(single-wall steel) is monitored constantly by mechanical pressure gauges. Additionally,the piping system receives line tightness tests annually. 4. What method and equipment will be used for performing the monitoring? Quantitative monitoring will be used at all Southland sites. The ATG test monthly. The ATG system used by the Southland Corporation is the TIDEL EMS2000. The piping system is tested annually with line tightness tests and are constantly monitored with Red Jacket P.L.D. Leak Detectors which are equipped with Flow Restrictors. 5. Describe the location(s)where the monitoring will be performed. The Red Jackets are located in the turbine pit. The ATG probes are located in the tanks. 6. List the name(s)of the person(s) responsible for performing the monitoring and/or maintainingthe he equipment. The individual(s)responsible for monitoring the equipment is/are the store operator(s). The store operator(s)for this store are ManJit& Grupal Grewal. The Southland Corporation is responsible for maintaining the equipment. 7. Reporting format: The TIDEL EMS unit keeps the results of leak tests in memory for 12 months. This information can be printed by following the instructions on the unit 8. State the preventive maintenance schedule for the monitoring equipment Note: The maintenance schedule shall he in accordance with the manufacturer's instructions Equipment repairs and replacement will be performed as needed. Additionally, in accordance with the manufacturer's instructions,the monitoring equipment will be tested annually to certify that it is functioning properly. 9. Describe the training needed for the operation of both the tank system and the monitoring equipment. Training is provided for new employees. Training refreshers are offered as needed. The operations manual for the equipment was provided to the store operator when the equipment was installed. Training also includes emergency procedures and spill clean-up.