Laserfiche WebLink
1-2100-PEVR Series 1-2100-DEVR Series 1 <br /> Vapor Recovery Spill Container Product Fill Spill Container Series Direct <br /> Spill Containment <br /> For CARBIEVR <br /> The OPW Thread-On 1-2100-EVR <br /> Series Spill Containers are certified <br /> for installation on OPW Phase I EVR <br /> Systems.All Fill Port Spill Containers <br /> feature an enhanced 1 DK-2100-EVR <br /> vapor tight drain valve(DEVR Models). <br /> The Vapor Return Spill Containers (PEVR <br /> Models)feature a permanent plug in <br /> the drain port as per EVR requirements. <br /> The 1-2100-EVR Series Thread-On Spill <br /> — Containers are available in Composite <br /> DRAIN PLUG 71 S0-40OC-EVR or Cast Iron bases with either 5 or <br /> SERIES OVERFILL 15-gallon buckets. <br /> PREVENTION VALVE <br /> The FSA-400 Threaded Riser Face Seal <br /> Adaptor is installed on the fill pipe <br /> = below the spill container to provide a <br /> true sealing surface for the drop tube <br /> f ` flange on the 61 SO and 71 SO overfill <br /> prevention valve.The 61 SO and 71 SO <br /> ` series valves are installed in the base of <br /> P • the OPW EVR spill container with the <br /> patent-pending 611SK Jack Screw device. <br /> This configuration allows liquid in the <br /> spill container to be drained directly into <br /> ., <br /> 1DK-2100-EVR FSA-400 61JSK 71JSK _ the drop tube thereby isolating the drain <br /> Drain Valve Threaded Riser Jack Screw Jack Screw <br /> Adaptor USA Patent No.6,523,581 E85 EVR Approved valve from the tank ullage,eliminating a <br /> OPW notorious leak point in previous systems. <br /> Threaded Riser Adaptor(Face Seal Adaptor) <br /> An OPW FSA-400 Threaded Riser Face Seal Adaptor provides a flat,true sealing <br /> surface on threaded pipes where a gasket seal exists per EVR requirements.The FSA- <br /> 400 is installed on the fill pipe riser below the spill container to provide a true sealing <br /> surface for the drop tube flange on the overfill prevention valves.The FSA-400 is also <br /> required on tank gauging risers and optional on vapor risers and rotatable adaptors. <br /> 61JSK, 71JSK (Jack Screwa is ) <br /> Ordering eci is i <br /> Product# Description <br /> FSA-400 4" Face Seal Adaptor <br /> FSA-400-S 4"Short Face Seal Adaptor for Cast Iron Base Only <br /> 61JSK-4410 Jack Screw Kit for Composite Base Spill Bucket <br /> 61 JSK-44CB Jack Screw Kit for Cast Iron Base Spill Bucket <br /> 71JSK-4RMT Remote Fueling Jack Screw Kit E85 EVR Approved <br /> 71JSK-44M4 Jack Screw Kit for cast Iron Base Spill Buckets E85 EVR Approved <br /> • ®. °e e m ! e ° I e :1! i i i ;8 1 .opwgfobal.Com 57 <br />