Laserfiche WebLink
File MH29667 Page T1-2 of 2 Issued: 2005 09- 08 <br /> SIMULATED USE RESISTANCE TO FLUIDS TEST (FIBERGLASS REINFORCED PLASTIC" SUMP <br /> MATERIALS) : <br /> METHOD <br /> one sample assembly as described in Item B was placed in a container <br /> filled with each of the fluids Listed below such that the fittings inside the <br /> container were completely covered with the fluids. The samples and fluids <br /> were maintained at a temperature of 100OF throughout the exposure. Following <br /> 30 days in this condition, the containers were subjected to an internal <br /> pressure of 4.5 prig (based on a maximum sump depth of 10.3 ft..) for a period <br /> of at least 5 min. while the samples were examined for evidence of leakage. <br /> 100% Methanol <br /> 50% Methanol/50% ASTM Reference Fuel C <br /> 15% Ethanol/85% ASTM Reference Fuel C <br /> 10% Ethanol/90% ASTM Reference Fuel C <br /> 15% MTBE/85% ASTM Reference Fuel C <br /> RESULTS <br /> There was no evidence of leakage <br /> SIMULATED USE: RESISTANCE To FLUIDS TEST (FIBERGLASS REINFORCED PLASTIC SUMP <br /> MATERIALS) : <br /> METHOD <br /> one sample assembly as described in Item C was placed in a container <br /> filled with each of the fluids Listed below such that the fittings inside the <br /> container were completely covered with the fluids. The samples and fluids <br /> were maintained at a temperature of 100°F throughout the exposure. Following <br /> 30 days in this condition, the containers were subjected to an internal <br /> pressure of 4.5 psicd (based on a maximum sump depth of 10.3 ft.) for a period <br /> of at least 5 min. while the samples were examined for evidence of leakage. <br /> 1.00% Methanol <br /> 501; Methanol/501; ASTM Reference Fuel C <br /> 100% Ethanol <br /> 50% Ethanol/50% ASTM Reference Fuel. C <br /> 15% Ethanol/85% ASTM Reference Fuel C <br /> 1.0% Ethanol/90% ASTM Reference Fuel C <br /> 3.5% MTBE/85% ASTM Reference Fuel C <br /> RESULTS <br /> There was no evidence of leakage <br />