COMPLIANCE INFO_2002-2005 - Laserfiche WebLink

Home Browse Search

10/18/2005 TUE 10:30 FAX laoig/038 Acute(Short-Term) Health Effects: Fiberglass is primarily a mechanical irritant. Inhalation of dusts and fibers may cause temporary irritation of the mouth, nose, and throat. Skin contact with dust and fibers may produce itching and temporary irritation. Eye contact with dust and fibers may produce temporary mechanical irritation. Chronic(Long-Term)Health Effects: The long-term health effects of exposure are not known. Carcinogenicity: The International Agency for Research on Cancer (IARC) in June, 1987, categorized fiber glass continuous filament as not classifiable with respect to human carcinogenicity(Group 3). The evidence from human as well as animal studies was evaluated by IARC as insufficient to classify fiber glass continuous filament as a possible,probable, or confirmed cancer causing material. The American Conference of Governmental industrial Hygienists (ACGIH) A4 classification, not classifiable as a human carcinogen, for respirable continuous filament glass fibers Is based on inadequate data in terms of its carcinogenicity in humans and/or animals. Signs and Symptoms of Exposure: Skin contact with this product may yield redness and an itchy, sometimes bumpy, rash. Inhalation of fiberglass particles may cause sore throat,mouth, and nose. Medical Conditions General/Aggravated by Exposure: Existing skin or respiratory disorders may be aggravated upon exposure. Emergency and First Aid Procedures: inhalation: First aid is normally not required. If symptoms develop, move individual to fresh air. If symptoms persist, seek medical attention_ Skin Contact. Gently wash all affected skin areas thoroughly with water soap and water. Do not rub or scratch affected areas as this will drive fibers deeper into the skin. Seek medical attention if symptoms or Irritation persists. Eye Contact Flush eyes with water for at least 15 minutes. if irritation persists or burning sensation is evident, seek immediate medical attention. ingestion First aid is normally not required. If symptoms develop, move individual to fresh air. If symptoms persist, seek medical attention_ HMIS Ratings.......................................Health (1)—Flammability(Q)—Reactivity(0) VII. PRECAUTIONS FOR SAFE HANDLING and USE Steps to be Taken in Case Material is Released or Spill: Not applicable. Waste Disposal Method: Disposal must be in accordance with applicable laws. Precautions to be Taken In Handling and Storage: Minimize skin contact and breathing of dusts_ VIII. CONTROL MEASURES Resoiratory Protection: Such protection to maintain employee exposures below prescribed limits. Ventilation: A system of local and/or general exhaust is recommended when cutting or sanding_ Hand Protection: None specifically recommended,but may reduce irritation in sensitive individuals. Eye Peron: ANSI-approved safety glasses with side shields when cutting or grinding Other: Such clothing as to minimize or eliminate skin contact. IX. REGULATORY INFORMATION (Not meant to be all-inclusive) Hazardous Materials Transportatign Act(HMTA) When offered alone, this material should be classified as follows: Proper Shipping Name........................................................................Non-Regulated Revision Date: 04-2005 Page 2 of 3 MSDS Fiberglass