Laserfiche WebLink
Smith Fiberglass Products <br />Sump Adapter <br />Pipe entries through sump walls <br />should be sealed tight to prevent <br />product from escaping out in the <br />event of a spill and water egress <br />into the sump. Our fiberglass sump <br />adapter is designed to serve both <br />purposes. <br />There are two preferred meth- <br />ods for installing the Smith Fiber- <br />glass Products sump adapter. <br />The following instructions should <br />be followed when installing the <br />Smith Fiberglass Products sump <br />adapter. <br />Step I <br />Saw and deburr hole in sump. <br />F LUBE FACE OF NUT <br />SUMP WALL Option B - Apply 1/2" beads of <br />Silaprene sealant or any RTV sili- <br />cone caulk all around, located as <br />shown by the arrows. <br />"A. DIA. HOLE <br />IN SUMP WALL <br />Step 2 <br />Option A- Lube the gasket, sump <br />wall, and nut face with a petro- <br />leum -base lubricant such as <br />Vaseline® brand petroleum jelly. <br />4 <br />NUT <br />APPLY SEALANT <br />GASKET <br />6113tZ5 <br />NLL <br />DY <br />NOTE: <br />SILAPRENEOOR ANY RTV SILICONE <br />CAULK IS SUITABLE AS A SEALANT. <br />ADAPTER BODY <br />E <br />'.7 <br />