Laserfiche WebLink
A*OPW APPROVED PRACTS FOR GARB / EVR - EXw11T1VE ORDER VR -102-A <br />OPW Overfill Prevention — <br />The OPW 61SO-40OC-EVR series Overfill Prevention Valves are certified <br />for installation on OPW Phase 1 EVR Systems. The vapor tight EVR <br />61SO's are designed to provide positive shut-off of product delivery before <br />an overfill condition occurs per EPA requirements without intervention from <br />the transport driver. The valve features a sealed float pivot and a threaded <br />lower tube connection and exceeds the EVR requirement for a maximum <br />vapor leak rate of .17CFH @2.0 in H2O. The 61 SO-EVR series valve is <br />installed in the base of the OPW EVR spill container with the patent <br />pending 61JSK Jack Screw device. This configuration allows liquid in <br />the spill container to be drained directly into the drop tube thereby isolating <br />the drain valve from the tank ullage, eliminating a notorious leak point in <br />previous systems. <br />Orderina Snecifications <br />Part No. <br />Description <br />OPW 61SO.4000-EVR <br />4" Overfill Valve, Two-point, 60" Upper Tube <br />and 83" Lower Tube <br />OPW 61SO-41OC-EVR <br />4" Overfill Valve, Two-point, 120" Upper Tube <br />and 102" Lower Tube <br />OPW 61SO.42OC-EVR <br />4" Overfill Valve, Two-point, 120" Upper Tube <br />and 126" Lower Tube <br />OPW 61SOM412C-EVR 4" Overfill Valve, Two-point, 120" Upper Tube, <br />Methanol M85 & M100. Tube Not Included <br />OPW 61JSK-4400-EVR <br />Jack Screw Assembly, CARB 61 SO Installation <br />Kit. Required on all 61SO-EVR Models <br />OPW Threaded Riser Adaptor <br />(Face Seal Adantor) — <br />An OPW FSA -400 Threaded Riser Face Seal Adaptor is required to <br />provide a flat, true sealing surface on threaded pipes where a gasket seal <br />exists per EVR requirements. The FSA -400 is installed on the fill pipe <br />riser below the spill container to provide a true sealing surface for the <br />drop tube flange on the 61SO-40OC-EVR overfill prevention valves. <br />The FSA400 is also required on tank gauging risers and optional on <br />vapor risers and rotatable adaptors. <br />Ordering Specifications <br />Part No. Description <br />OPW FSA400 4" Face Seal Adaptor <br />OPW Tank Bottom Protector — <br />The OPW/POMECO 6111-1400 Tank Bottom Protector is EVR certified <br />for installation at the bottom of the overfill prevention valve drop tube to <br />help prevent the underground storage tank from sustaining damage from <br />erosion or tank gauging sticks. <br />Ordering Specifications <br />Part No. Description <br />OPW 6111.1400 Tank Bottom Protector <br />Fill Spill <br />ner <br />OPW IDK -2100 <br />Drain Valve <br />OPW 61SO-400C <br />OPW FSA -400 <br />OPW 6111-1400 <br />I <br />DPW 634TT-EVR <br />Product Fill <br />Dust Cap <br />--OPW 61 SA-EVR <br />Series Swivel <br />Fill Adaptor <br />DPW 61JSK-4400-EVR <br />Jack Screw Drop Tube <br />Lock Down Device <br />DPW 61SO40OC-EVR <br />Series Overfill <br />Prevention Valve <br />OPWIPOMECO <br />111-EVR Series <br />Tank Bottom <br />Protector <br />