Laserfiche WebLink
0 0 <br /> protective device designed to protect the wearer work was performed in strict accordance with <br /> from an oxygen-deficient or otherwise this standard using form AF2. <br /> hazardous atmosphere. It supplies a respirable A4.3 The tank owner shall require form AF2 <br /> atmosphere that is either carried in or generated from the contractor. The tank owner shall <br /> by the apparatus and is independent of the verify that the form AF2 has been completed <br /> ambient environment. It is normally equipped with all necessary signatures and acknowledge <br /> with a full- face piece and is approved by receipt of form AF2 by signing a copy form <br /> NIOSH (National Institute of Occupational AF2. Form AF2 shall be maintained by the tank <br /> Safety and Health). owner to demonstrate compliance with this <br /> chapter and be made accessible to any <br /> designated authority having jurisdiction. <br /> A2.16 TANK LINING MATERIAL - A <br /> material applied to the interior of a tank to <br /> repair a tank, to prevent internal corrosion, to Note: Under applicable federal law, it is the <br /> prevent product release due to fixture external tank owners responsibility to determine that his <br /> corrosion, or to make a fiberglass tank tank meets the requirements for valid upgrade <br /> compatible with a stored product. and to maintain records that demonstrate his <br /> tank is in compliance with the upgrade <br /> requirements. Failure of the contractor to sign, <br /> A2.17 VAPOR AREA-Any area that has the certify and provide to owner form AFI and <br /> potential of containing flammable vapors form AF2 as specified in section A4. 1 and <br /> A4.2 does not meet the requirements of this <br /> A3.0 PERMITS&PLANS: chapter. <br /> A3.1 Prior to engaging in any activities relating <br /> to the alteration or repair of tanks or equipment A4.4 Tank lining materials shall be approved <br /> in connection with the storage, handling, use or for tank lining in accordance with this chapter <br /> sale of regulated flammable or combustible by satisfying one of the following requirements: <br /> liquids, consult local authorities to obtain any <br /> required permits. <br /> 1. Approvals of 4.5 <br /> 2. Approvals of 4.6 <br /> A4.0 REQUIRED APPROVALS& 3. Approvals of 4.7 <br /> CERTIFICATIONS <br /> A4.5 A lining material that is recognized for <br /> A4.1 The contractor shall certify to the tank storage of a specified liquid by Underwriters <br /> owner that the contractor and his employees Laboratory for the repair and lining of <br /> performing the repair or lining work are underground storage tanks. <br /> knowledgeable of all the procedures in Chapter <br /> A using form AFI. A4.6 MATERIAL TEST <br /> A4.2 The special inspector or qualified person A4.6.1 The lining material shall pass the <br /> and contractor shall certify to the owner that all following laboratory tests performed in <br /> 9 <br />