Laserfiche WebLink
i <br />Phil -Tits Installation and Maintenance Manual, Page 15 <br />Figure D-1 <br />Phil-Tite Model M/F4X4 Riser Adaptor <br />The Phil -rite MIF4X4 Riser Adaptor is designed to provide a flat, hue sealing surface for the <br />installation of a gasket sealed, threaded component such as a Spic Container, Threaded <br />Adaptor or storage tank gauging device. <br />INSTALLATION: <br />1. If installing a Will Container on the WF4X4, determine the final riser height required to meet <br />finished grade and then subtract 1-3/4` to include the M/F4X4 RiserAdaptor. For all other <br />components, determine the desired final riser height including the M/F4X4. Cut and thread the <br />riser pipe to the appropriate height. <br />2. Apply a gasoline resistant, non -hardening thread sealant to the threads of the riser pipe only. <br />13v hand thread the M/F4X4 onto the riser pipe. <br />3. Using an approved Installation Tool (Phil-Tde T-7043-1 Tool Kit), tighten the M/F4X4 onto the <br />riser to a torque value between 150 and 175 Foot -Pounds. <br />4. If installing a drop tube at the product fill riser, install the provided drop tube gasket under the <br />drop tube flange and insert the tube into the tank. <br />5. Install a Spill Container, threaded adaptor or tank gauging equipment onto the RiserAdaptor <br />ensuring that it is installed in conjunction with the Manufacturers Recommended lnsttlla- <br />don InstYuctions. <br />WARNING/ THE USE OF UNAPPROVED TOOLS OR IMPROPER INSTALLA77ON WILL <br />VOID ANYAND ALL APPLIED WARRANTIES. <br />