Laserfiche WebLink
Monit,)ring System Certification <br /> D. Results of Testing/Servicing <br /> Software Version Installed: 01.05 <br /> complete the folio i9m rherklipt. <br /> ED Yes ❑ No* I Is the audible alarm operational? <br /> 0 Yes ❑ No* Is the visual alarm operational? <br /> 0 Yes ❑ No* Were all sensors visually inspected, functionally tested,and confirmed operational? <br /> 0 Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br /> not interfere with their proper operation? <br /> ❑ Yes ❑ No* If alarms are relayed to a remote monitoring station, is all communications equipment (e.g.. modern) <br /> 10 N/A operational? <br /> * Yes ❑ No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment <br /> ❑ N/A monitoring system detects a leak, fails to operate,or is electrically disconnected? If yes: which sensors initiate <br /> positive shut-down? (Check all that apply) 0 Sump/Trench Sensors: ❑ Dispenser Containment Sensors. <br /> Did you confirm positive shut-down due to leaks and sensor failure/disconnection? 0 Yes. ❑No. <br /> 0 Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning, device (i.e., no <br /> ❑ N/A mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank <br /> fill point(s)and operating properly'! it so,at what percent oftank capacity does the alarm trigger? 950,,a <br /> ❑ Yes* 0 No Was any monitoring equipment replaced? If yes, identify specific sensors, probes., or other equipment replaced <br /> and list the manufacturer name and model for all replacement parts in Section E,below. <br /> ® Yes* ❑ No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that applo <br /> ❑ Product; 0 Water. If yes,describe causes in Section E,below. <br /> ® Yes EJ No* I Was monitoring system set-up reviewed to ensure proper settings'!Attach set up reports, if applicable <br /> ® Y I monitoring equipment operational per manufacturer's specifications? <br /> * In Section E below,describe how and when these deficiencies were or will be corrected. <br /> E. Comments: WATER WAS IN THE 91 STP SUMP . REMOVED WATER. <br /> I IN-036—3/6 wwwainidoes.org Rev.01/17/08 <br />