Laserfiche WebLink
Monitoring System Certification <br />D. Results of Testing/Servicing <br />Software Version Installed: <br />Comnlete the following: checklist: <br />® Yes ❑ No* <br />Is the audible alarm o rational? <br />® Yes O No* <br />Is the visual alarm operational? <br />® Yes O No* <br />Were all sensors visually inspected, functionally tested, and confirmed operational? <br />® Yes O No* <br />Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br />not interfere with their = operation? <br />® Yes O No* <br />If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) <br />O N/A <br />operational? <br />OYes ❑ No* <br />For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment <br />® N/A <br />monitoring system detects a leak, fails to operate, or is electrically disconnected? If yes: which sensors initiate <br />positive shut -down? (Check all that apply) O Sump/Trench Sensors; O Dispenser Containment Sensors. <br />Did you confirm psitive shut -down due to leaks d sensor failureldisconnection? O Yes; O No. <br />®Yes O No* <br />For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e. no <br />O N/A <br />mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank <br />fill oint s and o eratin ro erl ? If soat what percent of tank ca i does the alarm tri er? 90 % <br />O Yes* ® No <br />Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced <br />and list the manufacturer name and model for all r lacement parts in Section E, below. <br />OYes* H No <br />Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) <br />O Product; ❑ Water. If yes, describe causes in Section E, below. <br />® Yes O No* <br />Was monitoring stem set-up reviewed to ensure 12ropE settings? Attach set up reports, if a2elicable, <br />® Yes O No* <br />Is all monitoring ui mento erational Ur manufacturer's ecifications? <br />" In bection b below, describe how and when these deficiencies were or will be corrected. <br />E. Comments: 2 LS -600 sensors in 2 transition sumps. <br />UN -M - 214 Page 2 of 4 Rev. 06/04MI <br />www.unidecaorg <br />