Laserfiche WebLink
E <br />L� <br />P <br />I <br />0 <br />F, <br />7 <br />j <br />F <br />E <br />and stop at a preset time, (i.e. Daily, -Weekly or <br />Monthly). Each individual tank can be <br />programmed separately using function 87 and <br />88. Function 89 will print the Auto Leak Detect <br />set-up information. When the test frequency is <br />set for weekly or monthly testing, a notice will <br />be printed 24 hours in advance of the test start <br />time as a reminder. <br />Leak Detect Test results are printed automat- <br />ically at the beginning and end of the test <br />period. Results are printed only for the tank or <br />tanks selected. The reports include tank inven- <br />tory at the beginning of the test, with pass/fail <br />results and inventory printed at the end of the <br />test. The Last Leak Test result for each tank is <br />stored in memory and can be printed by press- <br />ing the Print key, PRINT, selecting choice 5, <br />and pressing ENT. <br />14 <br />E <br />The X76 ETM uses Seiko thermal paper #TP201-21 1 - <br />25c, 21/4" x 75'. Check with your local API/Ronan dis- <br />tributor or call 1-800-643-0085. <br />Open the controller door. <br />2. Remove the used paper roll, and save the roll shaft. <br />3. Put roll shaft in the new roll of paper. <br />4. Cut end of the new roll to a point and insert paper <br />between green printer board and the black printer <br />mechanism, until the tip of the paper extends out <br />of the printer on the front side of the controller. Pull <br />paper from front side until cut edges are free of <br />machine. <br />5. Reset the new paper roll in the slot on the bracket. <br />6. Select print to check printer operation. If there are <br />no visible characters, then the paper is reversed. <br />Remove the paper and re -feed with the paper side <br />reversed. <br />