Laserfiche WebLink
Sep 22 02 10:45a <br />Elite Iv Contractors Inc 209461 342 <br />to <br />MW <br />Fittings Dimensions <br />2 throughSizes <br />WO <br />isystems <br />Units <br />All dimensions are in U.S. Customary units (inches). <br />Diametric dimensions are maximums. <br />Insertion depths (X,, X2) are typical. <br />All weights (lb) are approximate. <br />TOleranCeS <br />Tolerance for centerline -to -face dimensions on fittings with bell -end <br />configuration is t'/ 6 inch. <br />LlStln <br />Dualoy 3000/L (s Lasted in the U.S. with Undervrriters Laborator(es for nonmetat((c <br />Underwriters <br />underground piping for petroleum products, alcohols (such as methanol and ethanol) <br />and alcohol -gasoline mixtures (Elle MH9162). Dualoy 3000/L pipe and fittings are <br />Lebaratories Inca <br />also listed with Underwriters Laboratones of Canada for petroleum products and <br />oxygenated fuels (File CMH 715), in the Netherlands with KIWA (Ref. ATA no. <br />2062/1-E), in Sweden with AB Statens Anlaggningsprovning (Certificate SA 1-1- <br />9846) and with the French Ministry of the Environment (Arrete 261 bis). in Great <br />Britain the Dualoy 3000/L system has been tested and accepted by the London Fire <br />and Civil Defence Authority. <br />End Configurations <br />Bell end is standard. <br />Taper angle <br />The taper angle on all bel( and spigot end configurations is 13/40. <br />Pmssure ratings See Ameron publication DUALOY 3000/L FIBERGLASS Pipe AND Ff7 INGs, FP265, for <br />pressure ratings. <br />individual system components may not have the same ratings as the pipe. <br />Refer to the detailed product information for the specific components to <br />determine the pressure rating for the system as a whole. <br />Manufacturing methods The fiberglass -reinforced epoxy resin fittings shown in this document are <br />manufactured by filament winding or compression molding. <br />Adapters: bell x NPT female Flange rings <br />Adapters: bell x NPT male Flange stub ends <br />Adapters: isolation Nipples <br />Adapters: spigot x NPT female Reducer bushings <br />Adapters: spigot x NPT male Repair couplings <br />450 Elbows Sleeve couplings <br />900 Elbows Sump penetration pieces <br />End caps Tees <br />FP266C (10/94) <br />