Laserfiche WebLink
IN <br />0 11 MLL DROP TUBES <br />tank. 1-11' is designedthe fill riser pipe to an underq <br />to transfer ground storage <br />deiwe,, Produc,, from the fill Connectio� <br />J[JE; <br />ailcl �ignt-fili aciaptor) to within 6" (Or per Or -al requirements) of the <br />bottom of the tank. This allows for submerged filling of the tank, resulting in a more <br />efficient delivery flow rate while reducing the build-up of vapors or foam in the tank. <br />.052" Thick Drop Tube Walls — <br />Deter denting and damage to the <br />tube upon installation or removal for <br />long service life. <br />Various Lengths and Diameters <br />Accommodate a variety of tank <br />diameters and fill riser Pipe sizes. <br />Replacement gaskets for the 61T-4" and the 61 So Series <br />are available. Order the OPW 6 1 TG (4000). <br />The OPW 61TC Coaxial Drop Tube is designed to replace an OPW 61T Conventional <br />Drop Tube when Stage I Vapor Recovery is required and a vapor recovery riser pipe <br />is not available on the tank or would require excavation to the top of the tank. The <br />6 1 TC is used in conjunction with OPW 633TC Coaxial Vapor Recovery Adaptors to <br />return vapors to the tank truck, through one riser Pipe, during a fuel delivery to an <br />underground storage tank. The upper section of the 61TC is tapered to allow vapors <br />to return to the tank truck through the interstitial space between the riser pipe and out- <br />side wall of the drop tube. Simultaneously, product is delivered to the I <br />the center of the 61TC. . tank through <br />0PW - 61 T <br />1TCP <br />-oAXIFILL <br />The <br />oW61TCPPoppefted Coaxial Fill Dro Tube is <br />toD <br />tRheO61TC, but UUbuBBt EEisspringloadedWh nusedincon,unctionwith theOPW 63TCR the 61T�P act <br />sSS a <br />saPoppet to close off vapor return side ofthecoaxial <br />coaxiIfIIItube. <br />♦ .052" Thick Drop Tube Walls — <br />Deter denting and damage to the <br />tube upon installation or removal for <br />long service life. <br />♦ Various Lengths and Diameters <br />Accommodate a variety of tank <br />diameters and fill riser Pipe sizes. <br />♦ Fully Welded Retaining Brackets <br />Ensure a secure installation in the <br />riser pipe. <br />♦ Three Centering Springs — Enable <br />even flow of vapors back to the <br />tank truck. <br />Order!Ell, Specifications <br />MOM No. <br />Diameter <br />Length Weight <br />61TC-7168 <br />in. <br />3- <br />mm. <br />76 <br />ft. <br />- -M-. lbs. kg. <br />'326 <br />61TC-727U <br />4" <br />102- <br />13' <br />13' <br />6.75 3.077 <br />U5,' 8.64 3 <br />6ITC-7272 <br />4' <br />102 <br />16, <br />.93 <br />Or,- 13.82 <br />6ITCP-3800 <br />------ <br />if <br />: ------- <br />IUZ <br />Tt <br />13' <br />346 896 <br />Telephone: (513) 870-3219 * (800) 422-2525 Fax: (513) 870-9186 * Fax: (800) 421.3297 <br />@ Copyright 2000, OPW Fueling Components P.O. Box 405003 * Cincinnati, OH 45240-5003 ® Printed in USA ® 7100 <br />