Laserfiche WebLink
RE <br /> D. Results of Testing/Servicing � 4i' � 2 Zvi I <br /> Software Version Installed: 317.02 <br /> Ems(".�LT <br /> Coat late the followi checklist; <br /> x Yes No' Is the audible alarm operational? <br /> u Yes No* Is the visual alarm operational? <br /> x Yes No` Were all sensors visually inspected,functionally tested,and confirmed operational? <br /> x Yes No` Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will nal interfere with their <br /> ro er operation? <br /> w Yes No" If alarms are relayed to a remote monitoring station,is all communications equipment(e.g.modem)operational? <br /> N/A <br /> e piping secondary containment monitoring system <br /> x Yes No* For pressurized piping systems, does the turbine automatically shut down if th <br /> N/A detects a leak,fails to operate,or is electrically disconnected? if yes:which sensors initiate positive shutdown? (Check all that apply) <br /> BSump/Trench Sensors; ODispenser Containment Sensors. Did you confirm positive shut-down due to leaks and sensor <br /> failure/disconnection? ElYes; E]No. <br /> Yes No` For tank systems that utilize the monitoring system as the primary tank overfill warning device(ti no mechanical overfill prevention <br /> x N/A valve is installed),is the overfill warning alarm visible and audible at the tank fill point(s)and operating properly? If so,at what percent <br /> Of tank C aci does the alarm tri er? % <br /> x Yes' No Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced and list the <br /> manufacturer name and model for all replacement parts in Section E,below. <br /> Yes" K No Was liquid found inside any secondary containment systems designed as dry systems? (Check alt Phat apply)[]Product; pWater. if <br /> es,describe causes In Section E,glow. <br /> x Yes No, Was monitoring system set-up reviewed to ensure proper settings?Attach set up reports,if applicable <br /> x, Yes No* Is all monitoring equipment operational per manufacturer s specifications? <br /> *In Sect"son E below,describe how and when these deficiencies were or will be corrected. <br /> E. Comments: <br /> UQC 14/15 sensor was defective. Had to re lace with a neve 794380-208 Sensor. Tested as <br /> needed after and checked out okay. <br /> Monitoring System Certification <br /> Page of 12/07 <br />