COMPLIANCE INFO_2007-2013 - Laserfiche WebLink

Home Browse Search

Page 4 of 8 3. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer ®Industry Standard Q Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum ®Hydrostatic ❑Other(Specify) Test Equipment Used: See attached testing procedures Equipment Resolution: Sump#87 Sump# 91 Sump Diameter: 48" 48" Sump Depth: 79" 79" Sump Material&Manufacturer: Fiberglass Fiberglass Height from Tank Top to Top of 1259 1299 Highest Piping Penetration: Height from Tank Top to Lowest 2799 2719 Electrical Penetration: Condition of sump prior to testing: Fair Fair Portion Of Sum Tested' Above highest Above highest Above highest Above highest Sump enetration penetration penetration penetration Does turbine shut down when sump sensor detects liquid(both ❑Yes❑No®NA ❑Yes❑No®NA ❑Yes❑No®NA ❑Yes❑No®NA product and water)?` Turbine shutdown response time Is system programmed for fail-safe shutdown?* E]Yes E]No®NA ❑Yes F1No®NA ❑Yes❑No®NA ❑Yes F1No®NA Was fail-safe verified to be ®Yes❑No®NA ❑Yes❑No®NA ❑Yes❑No E NA Q Yes®No®NA operational?* Wait time between applying pressure/vacuum/water and starting 30 minutes 30 minutes 30 minutes 30 minutes test: Test Start Time: 12:05pm 12:09pm Initial Reading(RI): 0.5952 2.3099 Test End Time: 12:20pm 12:24pm Final Reading(RF): 0.5948 2.3103 Test Duration: 15 min 15 min Change in Reading(RF-Ri): 0.00034 0.00045 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 r ter a rya '"'' . Was sensor removed for testing? ®Yes❑No❑NA ®Yes❑No❑NA ❑Yes❑No❑NA ❑Yes❑No❑NA Was sensor properly replaced and E Yes❑No❑NA ®Yes❑No❑NA ❑Yes❑No❑NA ❑Yes❑No❑NA verified functional after testing? Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) i If the entire depth of the sump is not tested,specify how much was tested. If the answer to ggy of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)