Laserfiche WebLink
Software Version Installed:/171 1 <br />Comnlete the ff-llowin(y rhecla�ct <br />Yes <br />I ❑ No* <br />Is the audible alarm operational? <br />Yes <br />❑ No* <br />Is the visual alarm operational? <br />, Yes <br />❑ No* <br />Were all sensors visually inspected, functionally tested, and confirmed operational? <br />Yes <br />❑ No* <br />Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br />not interfere with their proper operation? <br />❑ Yes❑ <br />No* <br />If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) <br />N/A <br />operational? <br />Yes <br />❑ No* <br />For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment <br />❑ N/A <br />monitoring system detects a leak, fails to oper , or is electrically discon lected? If yes: which sensors initiate <br />positive shut -down? (Check all that apply) Sump/Trench Sensors; Dispenser <br />Containment Sensors. <br />Did you confirm Positive shut -down due to leaks and sensor failure/disconnection? Yes; ❑ No. <br />❑ Yes <br />❑ If No* <br />For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e. no <br />N/A <br />mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank <br />fill point(s) and operating properly? If so, at what• percent of tank capacity does the alarm trigger? <br />~ <br />% <br />Was any monitoring equipment replaced? If yes, identi s ecific sensorsfy p ,probes, or other equipment replaced <br />L�V, <br />and list the manufacturer name and model for all re lacement arts in Section E, below. <br />DS* <br />No <br />Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) <br />❑ Product; ❑ Water. If es, describe causes in Section E, below. <br />❑ No* <br />Was monitorin s stem set -u reviewed to ensure ro er settin s? Attach set a re orts, if a licable <br />s <br />❑ No* <br />Is all monitoring equipment oerational per manufacturer's specifications? <br />" In Section E below, describe how and when these deficiencies were or will be corrected. <br />lE. Comments: <br />