Laserfiche WebLink
Sierra Chemical Co. <br /> RCRA Contingency Plan <br /> Bulk chemical and fuel storage tanks are all located within secondary containments that are sized to <br /> contain 115 percent of the largest tank. The walls of the containments are higherthan the projected flood <br /> waters based on the floodplain boundary. This will eliminate contact and any potential contamination. <br /> Acid and Caustic Repack Containments <br /> The only area not located within a structure,where full containers are routinely stored, would be the acid <br /> and caustic repack containments. Sodium hydroxide,sulfuric acid, and hydrochloric acid arerepacked <br /> into containers varying from 5 to 500 gallons. The product is repacked into containers and normally <br /> loaded onto trucks for delivery the same day. However,there are occasions where full containers are left <br /> overnight in the containment area. There is very low probability that full containers would be transported <br /> by floodwaters from this area due to the following reasons: <br /> • .The specific gravity of the product is heavier than water and probably would not float. <br /> • The repack containments are on the very edge of.the floodplain boundary with the projected <br /> depth of floodwater being less than one foot. <br /> Sierra Chemical will however take steps to eliminate any potential of full containers moving downstream <br /> by relocating any filled containers into the secured warehouse upon threat of flooding. <br /> Empty Containers <br /> Containers are returnedfor refill and are stored at the facility.The US. DOT requires that all containers <br /> returned for deposit and refill are empty and that all caps or bungs in place. They also require that the I <br /> exterior.be free from residue. This eliminates the potential for contamination of floodwater coming in <br /> contact with the containers. The containers will float in the event of a flood and will be contained by the <br /> six-foot chain link fence that surrounds the facility. <br /> 7. Erriergency Termination Process <br /> For the transition from the emergency phase to the cleanup phase,the following items will be <br /> completed: <br /> • Emergency scene will be stabilized <br /> • Release of hazardous substances will be stopped <br /> • Reaction of hazardous substances will be controlled <br /> • The released hazardous substance will be contained within a localized manageable area <br /> • The area of contamination Will be adequately secure from unauthorized entry <br /> At every incident involving hazardous materials,there is a possibility that response personnel and their <br /> equipment will become contaminated. Emergency response personnel have procedures to minimize <br /> contamination or contact,and to properly dispose of contaminated materials. <br /> For non-emergencies and level I incidents,the following methods of decontamination are available for <br /> personnel, environment, and/or equipment according to emergency response procedures: <br /> • Absorption <br /> • Adsorption <br /> • Chemical degradation <br /> Prepared By: Issue date; Replaces: Pae: <br /> ACT Environmental Services, Inc. February 25,2016 g <br /> NA 25 of 44 <br />