Laserfiche WebLink
Com ''iance Statements f ' s osal Site Standards Page 2 <br /> 17666 Sanitary facilities were not available at the site or not maintained <br /> in a clean usable condition. <br /> 17667 Safe and adequate drinking water was not provided for the site per- <br /> sonnel. <br /> 17668 Communication facilites were not available to the site personnel. <br /> 17669 The site and equipment were not provided with adequate lighting <br /> while operating after dark. <br /> 17670 Approved safety helmets 4respirators were not provided for employees <br /> operating equipment at the site. <br /> Employees operating equipment at the site were not using the approved <br /> safety equipment provided by the operator. <br /> 17676 The unloading area was not confined to a small enough area at the <br /> site to provide adequate control of all wind blown materials . <br /> 17677 Refuse was not spread in compacted cells not to exceed a depth of <br /> approximately two (2) feet before compaction. <br /> 17678 Slopes and cuts of the working face were not maintained at a ratio <br /> which allows effective compaction of the wastes . <br /> 17679 The slope of the portions of the fill which will be the final exterior <br /> surface was not finished with a final cover that has a neat appear- <br /> ance and a horizontal to vertical ratio not to exceed one and three <br /> quarters (1 3/4) to one (1) . <br /> 17680 Stockpiled cover material was placed in an area that interfered with <br /> the operation of the site. <br /> 17681 Sufficient quantity of cover material was not available to meet the <br /> requirements of the site operations . <br /> 17682 Cover material compacted to a minimum thickness of six (6) inches <br /> was not placed over the compacted landfill wastes every hours . <br /> l � �z <br /> 17684 Cover material compacted to a minimum thickness of twelve (12) inches <br /> was not placed on all surfaces of the fill where refuse was stored <br /> more than 180 days . <br /> 17685 Cover material compacted to a minimum thickness of two (2) feet was <br /> not placed on the final cover after placement of the final lift. <br />