Laserfiche WebLink
In the case of the nondedicated pump, it is lowered into the well and then activate <br /> (power from 'the controller box is regWated which controls the discharge rate of the <br /> centrifugal purge pump). In the case of a Weil with a dedicatedurn th <br /> P P: e Pneumatic <br /> controller box is commected to the dedicated pump (some welts have special hi - <br /> gh-rate - <br /> purge pumps used only for purging, a be identified by the fittings on the cap). A <br /> dedicated a tube (kept locked at the Well head in a pwteatgve <br /> -bag) is then <br /> attached to the discharge fitting on the casing cap. The.Controller is then fumed oa and <br /> adjusted to reach the desired purge rate. <br /> Note: In all cases where gasoline powered generator or compressors are used, they axe to <br /> be placed at least ten feet downwind of the well being sampled. <br /> 5. During purging,field parameters (pH, electrical conductivity, turbidity, and ternperawm) <br /> will be monitored_ Parameter measurements will be recorded on Purge and Sample Logs. <br /> In addition field observations also vill be ma&and recorded.on the Purge and-Sample,- <br /> Logs. Such observations include-flow rat ;-volume-purge color,odor, bubbling or- <br /> any--other notable observations. An example of a Purge Characterization and Sample Log is <br /> attached. <br /> 6- Purging, will:continuc until stable parameter readings are obtained.. pH is considered <br /> stable if the readings do.not vary by gmter than 4.1 pH unit Temperature is considered <br /> stable if it does not vary by more#bat one degree Celsius. Conductivity and turbidity are <br /> considered stable if they do not vary by greater than •104/4- Field parametms.will be <br /> repeated at approximate five gallon in . A minimum of thu wen volumes of water <br /> will be removed from each well. The final,stablc,values will be recorded to be used in <br /> the annual report. <br /> sample CollectionSaMP " <br /> les will:be collected as soon as possible after purging is completed. Laboratory-supplied <br /> cOntiinas will be used to hold the.Prater samples_ Samples to be analyzed for volatile-organic <br /> consdtli=ts will be collected fust Deperiding on.the well, samples will be coli with either <br /> dedicated pumps or disposable bailers (a new fiztory Wrgind bailer will be used at each well). <br /> In the, case of dedicated pumps, the pump rate will be adjusted so that the sample will not be <br /> 4tated as it is collected in sample bottles. en ballers arc used, they will be lowered slowly <br /> into the well so not to disturb the water. The sample will be decantedinto the bottles slowly with - <br /> 84499-�Foi123 i oRm A-8 <br /> July I4.2000 <br />