Laserfiche WebLink
Test Test Designation Requirements <br />Specific Gravity, ASTM D792, MethodA, or AsTM D I iO5 2!_O932 g/ <br />Measure on pure resin without additives. <br />2.33 TEXTUREDGEOMEMBRANE <br />A. Manufacturing <br />and Properties. <br />I . <br />High Density Polyethylene geomembrane with textured surfaces on both <br />sides (double side) or a smooth surface on one side and a textured surface on <br />the other side (single side). Grid or"waffle" style texturing is not allowed. <br />2. <br />Do not exceed a combined maximum total of I percent by weight of additives <br />other than carbon black or pigment. Identify percentage of processing aids, <br />antioxidants, and other additives other than carbon black. <br />3. <br />Do not exceed 3.5 percent by weight of finished geomembrane for total <br />combined processing aids, antioxidants, carbon black, and other additives. <br />4 <br />Use materials produced in the United States or Canada. <br />5. <br />Provide finished product free from blemishes, holes, pin holes, bubbles, <br />blisters, excessive gels, undispersed resins, and/or carbon black, <br />contamination by foreign matter and nicks or cuts on edges. <br />6. <br />Roll manufactured sheets or panel for shipment. <br />7, <br />The Geomembrane Manufacturer shall provide results of tests performed <br />using the procedures listed in the following table, as well as certification that <br />the materials meet or exceed the specified values. <br />E <br />NAMON09WORAW <br />9 =1 <br />12111w1juju- Ing lumnell <br />D014MO. A <br />T.,& hd F <br />1 EM <br />