Laserfiche WebLink
3. The GEOSYNTHETICS CONTRACTOR is responsible for off-loading,storage,and <br /> transporting material from storage area to installation site. The EARTHWORK <br /> CONTRACTOR shall unload the materials if the GEOSYNTHETICS <br /> CONTRACTOR is not onsite. <br /> 4. The GEOSYNTHETICS CONTRACTOR shall be responsible for damage to HDPE <br /> geomembrane during delivery,even if the rolls are unloaded by the EARTHWORK <br /> CONTRACTOR. The QA/QC CONSULTANT will determine damage <br /> 1.8 WARRANTY (MANUFACTURER) <br /> A. Provide manufacturer's warranty for geomembrane material in compliance with <br /> provisions of the Conditions of the Contract. Provide a minimum 20-year pro rata <br /> warranty for the material against deterioration due to exposure to the elements,either <br /> exposed or buried. The warranty for material must cover costs of material <br /> replacement and installation; assuming the area is rendered in a clean, dry, <br /> unencumbered condition. In the event the area cannot be rendered as such, <br /> compensation for defective material will be provided to the OWNER on a pro rata <br /> basis for the estimated cost to the OWNER at that time of supplying and installing <br /> material to a clean,dry, and unencumbered condition by a third party installer. <br /> B. Installation: Provide an installation warranty for geomembrane material in <br /> compliance with the conditions of the Contract. Provide a minimum of 2 year non- <br /> pro rata warranty for the installation against defects. <br /> PART PRODUCTS <br /> 2.1 GEOMEMBRANE LABELING <br /> A. Provide the following information of geomembrane roll labels. <br /> 1. Length,width, and weight. <br /> 2. Name of manufacturer and fabricator. <br /> 3. Directions for unrolling. <br /> 4. Product identification; lot number, batch number,and roll number. <br /> 2.2 GEOMEMBRANE RESIN <br /> A. High Density Polyethylene (HDPE), new, first quality, compounded, and <br /> manufactured specifically for producing HDPE geomembrane. <br /> B. Do not mix resin types during manufacturing. <br /> C. Meeting the following requirements unless otherwise approved: <br /> Forward Landfill WMU FU-14 HIGH DENSITY POLYETHYLENE <br /> 02778 6 (HDPE)GEOMEMBRANE <br />