ARCHIVED REPORTS_2014_5 - Laserfiche WebLink

Home Browse Search

® SECTION 5 Containment System The WMU FU-14 containment system consists of a composite liner and LCRS on the base of the unit. The northern boundary of WMU FU-14 will connect to the southern limit of WMU FU-13 and the western boundary of WMU-14 will connect to the eastern boundary of WMU FU-10, where the modules intersect. The base liner system for WMU FU-14 consists of the following, from bottom to top: • Prepared subgrade; • Minimum 2-foot thick compacted clay liner with a maximum field hydraulic conductivity of 1 x 10-'cm/sec; • 60-mil,double-sided textured HDPE geomembrane liner; • Cushion geotextile; • One-foot thick blanket gravel and pipe network drainage layer with a minimum hydraulic conductivity of 0.1 cm/sec; • Nonwoven geotextile filter fabric; • One-foot thick protective operations layer Connection, transition, termination, and anchorage details have been designed (see Construction Drawings, Appendix A) to maintain continuity among all components and to provide connection access for future systems. 5.1 Lining System As shown on the Construction Drawings(Appendix A),the WMU FU-14 base lining system will consist of a 2-foot-thick compacted, clay liner overlain by a 60-mil thick, double-sided textured HDPE geomembrane. The base lining system meets the current prescriptive Title 27 regulations and complies with Forward's WDRs. 5.1.1 Clay Liner The clay liner will be constructed to meet the Specifications included in Appendix C. It will consist of fine-grained soils with significant clay content and without organic matter. The material will have at least 30 percent of particles passing a No.200 U.S. Standard sieve and be classified as SC (clayey sand), CL (lean clay, sandy or silty lean clay), or CH (fat clay, sandy or silty fat clay) by the Unified Soil Classification System (USCS). The clay liner will have a maximum field hydraulic conductivity of 1 x 10-' cm/sec when compacted to a minimum relative compaction of 93 percent at a water content 3 to 5 percent greater than the optimum water content as determined by the modified Proctor compaction test(ASTM D1557). WMU FU-14 REPORT.DOC 5-1