Laserfiche WebLink
Specifications. 0 <br />• Verify that the geotextile was not exposed to direct sunlight for more than 5 days. <br />• Examine the geotextile after installation to ensure that no potentially harmful foreign <br />objects are present. <br />The QA/QC Inspector must inform both the QA/QC Manager and Earthwork Contractor if the above <br />conditions are not met. <br />4.3.4 Repairs <br />Repair procedures include: <br />• Patching --used to repair large holes, tears, and small defective areas. <br />• Removal --used to replace large defective areas where the preceding method is not <br />appropriate. <br />4.4 Geosynthetic Clay Liner (GCL) <br />4.4.1 GCL Installation 0 <br />The Geosynthetics Contractor will handle all GCLs in such a manner as to ensure that they are not <br />damaged in any way, and will comply with the following: <br />• In the presence of wind, all GCLs will be sufficiently weighted with sandbags to prevent <br />their movement. Such sandbags will be installed during placement and will remain until <br />replaced with the overlying layer. <br />• GCLs will be cut using a utility knife in a manner approved by the QA/QC Inspector. <br />Care should be taken to prevent damage to any underlying liner system components <br />during cutting. <br />• During placement, care will be taken not to entrap stones, or moisture under the GCL. <br />Care will be taken not to drag equipment across the exposed GCL. <br />• Any GCL damaged by stones or other foreign objects, or installation activities will be <br />replaced at no additional cost to the Owner. <br />Page 37 0 <br />