Laserfiche WebLink
KLEINFELDER <br /> 9 NONCONFORMANCE <br /> ® Any deficiencies or failed tests shall be recorded on the daily log. Deficiencies or failed areas <br /> that are corrected and retested that day shall be marked as corrected on the daily log and no <br /> separate Nonconformance Report is required. <br /> When a tested area of deficiency or nonconformance has not been brought into conformance, <br /> or has not been tested for conformance by the QA/QC technician by the time the technician <br /> leaves the site for the day, a separate Nonconformance Report shall be written. <br /> An area of nonconformance shall not be left more than five days without being brought into <br /> conformance, unless approved by the Engineer. In the case of delayed conformance, a <br /> Delayed Conformance Report shall be prepared by the QA/QC technician and kept in a <br /> separate file. <br /> After bringing an area to conformance, the conformance shall be recorded on the daily log and <br /> on the original Nonconformance Report and Delayed Conformance Report with the date of <br /> conformance and the confirming test results. <br /> In the event of a failing test, all material for the lift being tested extending to the adjacent <br /> passing tests shall be removed and/or reworked until passing tests are obtained. At least two <br /> passing tests shall be obtained in each reworked area for each failing test. <br /> GSM.-MD 3EI94 Page 23 of 24 <br /> Copyright 1994 Kleinfelder,Inc. <br />