Laserfiche WebLink
PHASE III Random Load Checking <br /> The third phase of the hazardous waste screening program is a random load checking <br /> program. The load checking shall be conducted by an inspector trained in hazardous <br /> waste detection and handling. <br /> On a random basis, the trained inspector will select a load for inspection. The driver <br /> will be asked to unload the waste at a designated location. The driver will be instructed <br /> to pull forward while unloading, so that a long, narrow windrow is formed. The <br /> inspector will then sort through the windrow, using a rake or shovel. The material will <br /> be carefully observed for the presence of any prohibited wastes in the load. The methods <br /> by which the acceptability of wastes will be determined are described below. <br /> Observations will be recorded on the data sheet for the load. If necessary, photographs <br /> and samples will be uiken. <br /> The load-checking inspector will complete the load checking data sheet (Attachment 2), <br /> and along with the driver, sign the form. <br /> If hazardous or other unacceptable wastes are identified, the responsible party will be <br /> notified that the wastes must be removed from the facility premises and arrangements <br /> made for their proper disposal. <br /> L-\PR0JECr\3W MRF\RSI.APC C-5 Db ether 13.1993 <br />