Laserfiche WebLink
PHASE III Random Load Checking <br /> The third phase of the hazardous waste screening program is a random load checking <br /> program. Ile load checking shall be conductedby an inspector trained in hazardous <br /> waste detection and handling. <br /> On a random basis, the trained inspector will select a load for inspection. ne driver <br /> will be asked to unload the waste at a designated location. ne driver will be instructed <br /> to pull forward while unloading, so that a long, narrow windrow is formed. The <br /> inspector will then sort through the windrow, using a rAke or shovel. The material will <br /> be carefully observed for the presence of any prohibitedwastes in the load. The methods <br /> y which the acceptability of wastes will be determined are described below. <br /> Observations will be recorded on the data sheet for the load. If necessary, photographs <br /> and samples will be taken. <br /> The load-checking inspector will complete e load checking data sheet (Attachment 2), <br /> and along with the driver, sign the form. <br /> ® If hazardous or other unacceptable wastes are identified, the responsible party will be <br /> notified that the wastes must be removed m the facility premises and arrangements <br /> made for their proper disposal. <br /> L:VR -QC C-5 IS.IM <br />