COMPLIANCE INFO_2012-2016 - Laserfiche WebLink

Home Browse Search

Solid Waste Permittinga# Enforcement Regulations - Titl-Am CCR, Divi... Page 1 of 1 Section 18221.5.Facility Plan. :< Each operator of a Medium Volume Transfer/Processing Facility, or Direct Transfer Facility that is required to obtain a Registration Permit, as set forth in sections 17403.4 and 17403.6 and Title 14, Division 7, Chapter 5.0, Article 3.0, (commencing with section 18100) shall, at the time of application, file a Facility Plan or"Plan" with the EA as required in section 17403.8 of this Title. In order to maintain the permit, the operator must file amendments as necessary to maintain the accuracy of the Facility Plan required in section 17403.8 of this Title. Such amendments, or lack thereof, may become the basis for changes in the permit or for revocation of the permit. A Plan shall contain the following: (a) name(s) of the operator, owner, and the company they represent, if applicable; (b) schematic drawing of the building and other structures showing layout and general dimensions of the operations area, including, but not limited to, unloading, storage, loading, and parking areas; (c) descriptive statement of the manner in which activities are to be conducted at the facility; (d) days and hours that the facility is to operate. If the hours of waste receipt differ from the hours of material processing, each set of hours may be stated. For facilities with continuous operations, indicate the start of the operating day for purpose of calculating amount of waste received per operating day. The operator may also indicate whether or not, and when, other activities, such as routine maintenance will take place, if those activities will occur at times other than those indicated above; (e) total acreage contained within the operating area; (f) facility design capacity including the assumptions, methods, and calculations performed to determine the total capacity; (g) information showing the types and the daily quantities of solid waste to be received. If tonnage was figured from records of cubic yards, include the conversion factor used; (h) description of the methods used by the facility to comply with each state minimum standard contained in sections 17406.1 through 17419.2; (i) anticipated volume of quench or process water and the planned method of treatment, and disposal of any wastewater; (j) description of provisions to handle unusual peak loading; (k) description of transfer, recovery and processing equipment, including classification, capacity and the number of units; (I) planned method for final disposal of the solid waste; (m) planned method for the storage and removal of salvaged material; (n) resume of management organization which will operate the facility. Note: Authority cited: Sections 40502, 43020, and 43021 of the Public Resources Code. Reference: Sections 40053, 43020 and 43021 of the Public Resources Code. http://www.calrecycle.ca.gov/Laws/Regulations/Title 14/ch5a32.htm 3/29/2013