Laserfiche WebLink
_____________________________________________________________________ <br /> <br /> Revision Number: 3 <br /> Revision Date: June 05, 2019 7 of 7 Delo 400 SDE SAE 15W-40 <br /> SDS : 42671 <br />SECTION 09 - Physical/Chemical Properties information was modified. <br />SECTION 15 - SARA 311 EPCRA Score information was added. <br />SECTION 15 - SARA 311 Score information was deleted. <br />Revision Date: June 05, 2019 <br /> <br />ABBREVIATIONS THAT MAY HAVE BEEN USED IN THIS DOCUMENT: <br /> TLV - Threshold Limit Value TWA - Time Weighted Average <br /> STEL - Short-term Exposure Limit PEL - Permissible Exposure Limit <br /> GHS - Globally Harmonized System CAS - Chemical Abstract Service Number <br /> ACGIH - American Conference of Governmental <br />Industrial Hygienists <br /> IMO/IMDG - International Maritime Dangerous <br />Goods Code <br /> API - American Petroleum Institute SDS - Safety Data Sheet <br /> HMIS - Hazardous Materials Information System NFPA - National Fire Protection Association (USA) <br /> DOT - Department of Transportation (USA) NTP - National Toxicology Program (USA) <br /> IARC - International Agency for Research on <br />Cancer <br /> OSHA - Occupational Safety and Health <br />Administration <br /> NCEL - New Chemical Exposure Limit EPA - Environmental Protection Agency <br /> SCBA - Self-Contained Breathing Apparatus <br /> <br />Prepared according to the 29 CFR 1910.1200 (2012) by Chevron Energy Technology Company, 6001 Bollinger <br />Canyon Road, San Ramon, CA 94583. <br /> <br /> <br />The above information is based on the data of which we are aware and is believed to be correct as of the date <br />hereof. Since this information may be applied under conditions beyond our control and with which we may <br />be unfamiliar and since data made available subsequent to the date hereof may suggest modifications of the <br />information, we do not assume any responsibility for the results of its use. This information is furnished <br />upon condition that the person receiving it shall make his own determination of the suitability of the <br />material for his particular purpose. <br />